Sonstiges, Englisch, Band Volume 819, 506 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 819, 506 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03859-250-1
Verlag: Trans Tech Publications
The 79 papers are grouped as follows:
Chapter 1: Metallurgy;
Chapter 2: Steels and Alloys;
Chapter 3: Surface and Coating;
Chapter 4: Ceramics;
Chapter 5: Materials for Electronic and Electrical Industry;
Chapter 6: Polymers and Composites;
Chapter 7: Materials for Biomedical Application;
Chapter 8: Materials in Environmental Engineering and Construction;
Chapter 9: Materials and Technologies of Processing in Mechanical Engineering
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Biomaterialien, Nanomaterialien, Kohlenstoff
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Elektronik, Optik
Weitere Infos & Material
Non-Isothermal Kinetic Modelling for Hydrogen Reduction of Ferric Oxide Using MatlabInfluence of Semi-Solid Casting and Equal Channel Pressing on Microstructure of a Hypoeutectic Al-Si AlloyThe Role of Roller Speed on Solidification of Al-Mg-Si Alloy during Twin Roll Strip CastingThe Effects of Rolling Deformation and Annealing Treatment on Damping Capacity of 1200 Aluminium AlloyMicrostructure Evolution of Conventional and Semi-Solid Cast of A356 Aluminium Alloy with Addition of InoculantReduction Behaviour of Iron Ores by Agricultural Waste CharsEffect of Solution Treatment Temperature on Tensile Strength of Al-Mg-Si AlloyJoining Dissimilar Metals between Steel and Aluminum by TIG WeldingEffect of Aging Time to the Commercial Aluminum Alloy Modified with Zirconium AdditionEffect of Filler Metals on the Microstructures and Mechanical Properties of Dissimilar Low Carbon Steel and 316L Stainless Steel Welded JointsEffect of Aluminium and Silicon to IMC Formation in Low Ag-SAC SolderEffect of Cooling Rate on the Corrosion Behaviour of Zn-Al and Zn-Al-Mg AlloyWear Behaviour of TiC Coated AISI 4340 Steel Produced by TIG Surface MeltingPreliminary Study: Direct Growth Carbon Nanomaterials on Metal Substrate to Improve Corrosion ResistanceCorrosion Behavior of WC-Co Cermet CoatingsThe Microstructure and Mechanical Properties of Al/Al2O3 Surface Composite Layer Produced by FSP Green TechniqueEffect of Complexing Agent in Ni-P Coating on Cu SubstrateThe Effect of Applied Voltage and Anodisation Time on Anodized Aluminum Oxide NanostructuresNanocomposite TiAlBN Coatings as a Corrosion Protection Layer for AZ91 Mg Alloy Substrate in NaClSynthesis of Polycrystalline LaYO3 with Different Sintering TemperatureThe Effects of Fly Ash Addition on the Properties of Porous Clay-Fly Ash CompositesA Study on Densification and Grain Growth of Ba(Ce,Zr)O3 Prepared by a Two-Step SinteringEffect of Mould Pressure and Substitution of Quartz by Rice Husk Ash on the Bulk Density and Compressive Strength of Porcelain BodyEffect of Surfactant on the Thermal Behavior of Cerate-Zirconate Ceramic Powder Prepared by Modified Sol-Gel MethodEffect of Corn Starch and Potato Starch as the Pore Forming Agent to the Structure of Porous CordieriteThe Effect of Synthesis Temperature on Interlayer Mixing in Layered Rock Salt Cathode Materials LiNi0.7Mn0.1Co0.2O2 for Li-Ion Batteries ApplicationThe Effect of Micron-Size Silicon Additions on Microstructure, Microhardness and Thermal Properties of Sn-Cu-Ni Solder AlloyEffect of Si3N4 Addition on the Properties of Sn-1.0Ag-0.7Cu Solder AlloyReview on Preparation and Properties of High-K Dielectric Material Based on Lanthanum Doped Barium TitanateCharacterisation of Cation Ordering in Layered Rock-Salt LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium Ion BatteriesSingle-Walled Carbon Nanotubes ? Graphene Mixture as a Dye Monolayer for Dye-Sensitized Solar CellsEffects of Annealing on the Properties of Copper Oxide Thin FilmsSignificant Influences of Co-Doping Ag and Sb on Electrical Properties and Thermoelectric Applications of AgPbmSbTem+2 Compounds Synthesized Using Solid State Microwave TechniqueStudied on Structural Characterization of Lanthanum Doped Barium Titanium CeramicsModeling the Effect of ARC and other Parameters on the Efficiency of GaAs Solar Cell Using SilvacoEstimation of Material Damping Coefficients of AlN for Film Bulk Acoustic Wave ResonatorThermal Annealing Effect on Properties of Zn Foils SubstratesSic-Reinforced Aluminum-Silicon Composite via Pressureless Infiltration Using Polystyrene as External Binder for Electronic AssembliesNanocrystal TiO2 Engulfed SiO2-Barium Hexaferrite for Enhanced Electrons Mobility and Solar Harvesting PotentialSynthesis and Characterisation of Li1-xNaxNi1/3Co1/3Mn1/3O2 as Cathode Materials for Rechargeable Lithium BatteriesEffects of Compatibilizer on Thermal and Mechanical Properties of PLA/NR BlendsCompression Test and Energy Absorption of Polyurethane/Multi Walled Carbon Nanotubes Foam CompositesCrystallinity and Morphological of Cellulose Extraction from Elaeis guineensis Jacquin FrondKenaf-Unsaturated Polyester Composite: The Effect of Different Retting Process of Kenaf Bast Fiber on the Mechanical PropertiesA Comparative Study of Metal Oxides (CaO, CuO and CaO/CuO) Effects on the Morphology and Thermal Stability of PANI NanofibersWear Properties of Metal Matrix Composite Al-Cu and Al-Cu-TiB2Effect of Microwave and Conventional Heating on Sintering Behavior of Cu-10vol.%SiC NanocompositesNanostructured WO3 ? Synthesis and PropertiesEffects of Maleated Natural Rubber on Mechanical Properties of Polylactic Acid/Natural Rubber BlendsEpoxy Layered Silicates with Fly Ash-Based Geopolymer: Flexural PropertiesTensile and Flexural Strength of Untreated Napier Grass Fibre/Polyester CompositesCorrosion Performance of Nitrided Based Coating on AZ9I Mg Alloy in Hank?s SolutionFabrication and Characterization of Different Ca Content in Mg-Ca Composite Using Powder Metallurgy TechniqueThe Effect of Zn Concentration on the Corrosion Behavior of the Composite Magnesium-10wt.% Bio-GlassMicrostructure and Compressive Strength of Magnesium-Zinc Alloy Reinforced with Different Percentage of Bio-Glass ContentThe Effect of Sintering Temperature on the Sintered Mg/3wt.%Zn-Bioglass (45S5) CompositesMicrostructural and Corrosion Behavior of Biodegradable Magnesium Alloys for Biomedical ImplantBiomedical Applications: Composite Metal Alloys with AdditivesDesign of Experiment (DOE) Study of Hydroxyapatite-Coated Magnesium by Cold Spray DepositionEffects of Surface Treatment on Titanium Alloys Substrate by Acid Etching for Dental ImplantPore Characteristics of Mesoporous Carbonated Hydroxyapatite Synthesised with Different Nonionic Surfactant and Carbonate ConcentrationThe Development of Macroporous PEG-Based Hydrogel Scaffolds for Tissue Engineering ApplicationsA Short Review on In Vitro Bioactivity Behavior of Magnesium CompositesInfluence of Alginate Concentration on the Diametral Tensile Strength of Hydroxyapatite (HAp) BlockInfluence of Recycled Wastes on Slag Foaming during EAF SteelmakingResponse of Armour Plate Subjected to Blast Loading Based on Analytical Model of Second Order Single Degree of FreedomReactions of Limestone on the Slaking Process under Different Conditions of ParametersEffects of Quarry Dust as Partial Sand Replacement on Compressive Strength and Crack Profile of Cement CompositesSynthesis and Morphological Characterization of Gold Nanoparticles (AuNPs) Supported on Anodized Titanium Oxide (TiO2) NanotubesThe Effects of Hydrothermal Ageing on the Crushing Behavior of Glass/Epoxy Composite PipesComparative Study of Small Scale Soil Barrier Subjected to Air Blast Load by Using AUTODYN 2D and AUTODYN 3DCharacterization of Hematite Nanoparticles (Fe2O3) Produced by High Energy Milling for Dye Removal CatalystAmmonia Gas Sensor Based on Chitosan BiopolymerStrength of Adhesive T-Joint under Moisture ConditionStrength of Adhesive T-Joint in Granulator Fluidization Bed at Elevated TemperatureA Study on the Impact of the Milling Parameters on the Surface Roughness when Using Polyurethane Board as a Base Material in Manufacturing Automotive Checking FixturesSimulation Study on Failure of Constant Force Spring (CFS) Fitted in a Counter Balancinglinkage MechanismVisual Inspection on Failure Surface of Constant Force Spring (CFS) Fitted in a Counterweight Balancing MechanismFailure Analysis of Crane Wire Rope
