International Conference on Functional Materials and Metallurgy (ICoFM 2014)

Selected, peer reviewed papers from the International Conference on Functional Materials and Metallurgy (ICoFM 2014), September 17-18, 2014, Pulau Pinang, Malaysia
Erscheinungsjahr 2015
ISBN: 978-3-03835-473-4
Verlag: Trans Tech Publications

Buch, Englisch, 506 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 970 g

Collection of selected, peer reviewed papers from the International Conference on Functional Materials and Metallurgy (ICoFM 2014), September 17-18, 2014, Pulau Pinang, Malaysia.The 79 papers are grouped as follows: Chapter 1: Metallurgy; Chapter 2: Steels and Alloys; Chapter 3: Surface and Coating; Chapter 4: Ceramics; Chapter 5: Materials for Electronic and Electrical Industry; Chapter 6: Polymers and Composites; Chapter 7: Materials for Biomedical Application;Chapter 8: Materials in Environmental Engineering and Construction; Chapter 9: Materials and Technologies of Processing in Mechanical Engineering

Autoren/Hrsg.

Yunos, Nur Farhana Mohd

Zakaria, Zunaida

Munusamy, Sri Raj Rajeswari

Ying, Lim Bee

Jamil, Noorina Hidayu

Abdul Halif, Norzilah

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Elektronik, Optik
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe
• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Biomaterialien, Nanomaterialien, Kohlenstoff

Inhaltsverzeichnis

Preface, Committees and Sponsors
Chapter 1: Metallurgy
Non-Isothermal Kinetic Modelling for Hydrogen Reduction of Ferric Oxide Using Matlab
Influence of Semi-Solid Casting and Equal Channel Pressing on Microstructure of a Hypoeutectic Al-Si Alloy
The Role of Roller Speed on Solidification of Al-Mg-Si Alloy during Twin Roll Strip Casting
The Effects of Rolling Deformation and Annealing Treatment on Damping Capacity of 1200 Aluminium Alloy
Microstructure Evolution of Conventional and Semi-Solid Cast of A356 Aluminium Alloy with Addition of Inoculant
Reduction Behaviour of Iron Ores by Agricultural Waste Chars
Chapter 2: Steels and Alloys
Effect of Solution Treatment Temperature on Tensile Strength of Al-Mg-Si Alloy
Joining Dissimilar Metals between Steel and Aluminum by TIG Welding
Effect of Aging Time to the Commercial Aluminum Alloy Modified with Zirconium Addition
Effect of Filler Metals on the Microstructures and Mechanical Properties of Dissimilar Low Carbon Steel and 316L Stainless Steel Welded Joints
Effect of Aluminium and Silicon to IMC Formation in Low Ag-SAC Solder
Chapter 3: Surface and Coating
Effect of Cooling Rate on the Corrosion Behaviour of Zn-Al and Zn-Al-Mg Alloy
Wear Behaviour of TiC Coated AISI 4340 Steel Produced by TIG Surface Melting
Preliminary Study: Direct Growth Carbon Nanomaterials on Metal Substrate to Improve Corrosion Resistance
Corrosion Behavior of WC-Co Cermet Coatings
The Microstructure and Mechanical Properties of Al/Al2O3 Surface Composite Layer Produced by FSP Green Technique
Effect of Complexing Agent in Ni-P Coating on Cu Substrate
The Effect of Applied Voltage and Anodisation Time on Anodized Aluminum Oxide Nanostructures
Nanocomposite TiAlBN Coatings as a Corrosion Protection Layer for AZ91 Mg Alloy Substrate in NaCl
Chapter 4: Ceramics
Synthesis of Polycrystalline LaYO3 with Different Sintering Temperature
The Effects of Fly Ash Addition on the Properties of Porous Clay-Fly Ash Composites
A Study on Densification and Grain Growth of Ba(Ce,Zr)O3 Prepared by a Two-Step Sintering
Effect of Mould Pressure and Substitution of Quartz by Rice Husk Ash on the Bulk Density and Compressive Strength of Porcelain Body
Effect of Surfactant on the Thermal Behavior of Cerate-Zirconate Ceramic Powder Prepared by Modified Sol-Gel Method
Effect of Corn Starch and Potato Starch as the Pore Forming Agent to the Structure of Porous Cordierite
Chapter 5: Materials for Electronic and Electrical Industry
The Effect of Synthesis Temperature on Interlayer Mixing in Layered Rock Salt Cathode Materials LiNi0.7Mn0.1Co0.2O2 for Li-Ion Batteries Application
The Effect of Micron-Size Silicon Additions on Microstructure, Microhardness and Thermal Properties of Sn-Cu-Ni Solder Alloy
Effect of Si3N4 Addition on the Properties of Sn-1.0Ag-0.7Cu Solder Alloy
Review on Preparation and Properties of High-K Dielectric Material Based on Lanthanum Doped Barium Titanate
Characterisation of Cation Ordering in Layered Rock-Salt LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium Ion Batteries
Single-Walled Carbon Nanotubes – Graphene Mixture as a Dye Monolayer for Dye-Sensitized Solar Cells
Effects of Annealing on the Properties of Copper Oxide Thin Films
Significant Influences of Co-Doping Ag and Sb on Electrical Properties and Thermoelectric Applications of AgPbmSbTem+2 Compounds Synthesized Using Solid State Microwave Technique
Studied on Structural Characterization of Lanthanum Doped Barium Titanium Ceramics
Modeling the Effect of ARC and other Parameters on the Efficiency of GaAs Solar Cell Using Silvaco
Estimation of Material Damping Coefficients of AlN for Film Bulk Acoustic Wave Resonator
Thermal Annealing Effect on Properties of Zn Foils Substrates
Sic-Reinforced Aluminum-Silicon Composite via Pressureless Infiltration Using Polystyrene as External Binder for Electronic Assemblies
Nanocrystal TiO2 Engulfed SiO2-Barium Hexaferrite for Enhanced Electrons Mobility and Solar Harvesting Potential
Synthesis and Characterisation of Li1-xNaxNi1/3Co1/3Mn1/3O2 as Cathode Materials for Rechargeable Lithium Batteries
Chapter 6: Polymers and Composites
Effects of Compatibilizer on Thermal and Mechanical Properties of PLA/NR Blends
Compression Test and Energy Absorption of Polyurethane/Multi Walled Carbon Nanotubes Foam Composites
Crystallinity and Morphological of Cellulose Extraction from Elaeis guineensis Jacquin Frond
Kenaf-Unsaturated Polyester Composite: The Effect of Different Retting Process of Kenaf Bast Fiber on the Mechanical Properties
A Comparative Study of Metal Oxides (CaO, CuO and CaO/CuO) Effects on the Morphology and Thermal Stability of PANI Nanofibers
Wear Properties of Metal Matrix Composite Al-Cu and Al-Cu-TiB2
Effect of Microwave and Conventional Heating on Sintering Behavior of Cu-10vol.%SiC Nanocomposites
Nanostructured WO3 – Synthesis and Properties
Effects of Maleated Natural Rubber on Mechanical Properties of Polylactic Acid/Natural Rubber Blends
Epoxy Layered Silicates with Fly Ash-Based Geopolymer: Flexural Properties
Tensile and Flexural Strength of Untreated Napier Grass Fibre/Polyester Composites
Chapter 7: Materials for Biomedical Application
Corrosion Performance of Nitrided Based Coating on AZ9I Mg Alloy in Hank’s Solution
Fabrication and Characterization of Different Ca Content in Mg-Ca Composite Using Powder Metallurgy Technique
The Effect of Zn Concentration on the Corrosion Behavior of the Composite Magnesium-10wt.% Bio-Glass
Microstructure and Compressive Strength of Magnesium-Zinc Alloy Reinforced with Different Percentage of Bio-Glass Content
The Effect of Sintering Temperature on the Sintered Mg/3wt.%Zn-Bioglass (45S5) Composites
Microstructural and Corrosion Behavior of Biodegradable Magnesium Alloys for Biomedical Implant
Biomedical Applications: Composite Metal Alloys with Additives
Design of Experiment (DOE) Study of Hydroxyapatite-Coated Magnesium by Cold Spray Deposition
Effects of Surface Treatment on Titanium Alloys Substrate by Acid Etching for Dental Implant
Pore Characteristics of Mesoporous Carbonated Hydroxyapatite Synthesised with Different Nonionic Surfactant and Carbonate Concentration
The Development of Macroporous PEG-Based Hydrogel Scaffolds for Tissue Engineering Applications
A Short Review on In Vitro Bioactivity Behavior of Magnesium Composites
Influence of Alginate Concentration on the Diametral Tensile Strength of Hydroxyapatite (HAp) Block
Chapter 8: Materials in Environmental Engineering and Construction
Influence of Recycled Wastes on Slag Foaming during EAF Steelmaking
Response of Armour Plate Subjected to Blast Loading Based on Analytical Model of Second Order Single Degree of Freedom
Reactions of Limestone on the Slaking Process under Different Conditions of Parameters
Effects of Quarry Dust as Partial Sand Replacement on Compressive Strength and Crack Profile of Cement Composites
Synthesis and Morphological Characterization of Gold Nanoparticles (AuNPs) Supported on Anodized Titanium Oxide (TiO2) Nanotubes
The Effects of Hydrothermal Ageing on the Crushing Behavior of Glass/Epoxy Composite Pipes
Comparative Study of Small Scale Soil Barrier Subjected to Air Blast Load by Using AUTODYN 2D and AUTODYN 3D
Characterization of Hematite Nanoparticles (Fe2O3) Produced by High Energy Milling for Dye Removal Catalyst
Ammonia Gas Sensor Based on Chitosan Biopolymer
Chapter 9: Materials and Technologies of Processing in Mechanical Engineering
Strength of Adhesive T-Joint under Moisture Condition
Strength of Adhesive T-Joint in Granulator Fluidization Bed at Elevated Temperature
A Study on the Impact of the Milling Parameters on the Surface Roughness when Using Polyurethane Board as a Base Material in Manufacturing Automotive Checking Fixtures
Simulation Study on Failure of Constant Force Spring (CFS) Fitted in a Counter Balancinglinkage Mechanism
Visual Inspection on Failure Surface of Constant Force Spring (CFS) Fitted in a Counterweight Balancing Mechanism
Failure Analysis of Crane Wire Rope

Über Autor(innen)

Eds. Nur Farhana Diyana Mohd Yunos, Zunaida Zakaria, Sri Raj Rajeswari A/P Munusamy, Lim Bee Ying and Noorina Hidayu Jamil