Materials Science and Technology IX

MSAT-9
Erscheinungsjahr 2017
ISBN: 978-3-0357-2082-2
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volume 751, 860 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Key Engineering Materials

The book is collected from papers that were submitted on the 9th International Conference on Materials Science and Technology (MSAT-9, December 14-15, 2016, Bangkok, Thailand) and is devoted to the modern issues of research and development in area of materials and materials processing technologies. We hope this collection should be useful for wide range of specialists from various branches of engineering activity.

Autoren/Hrsg.

Pinwanich, Peerapong

Soisungval, Akrapol

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

The Thermal-Aging Effect on the Microstructure Evolution and Shear Strength of the Sn-Rich Au-Sn Soldering between Altic and Si Substrate in MicroelectronicsEffect of Cooling Rate on the Microstructural and Mechanical Properties of Sn-0.3Ag-0.7Cu-0.05Ni Solder AlloyEffect of Si Content on Mechanical Properties of Ti-Si-N Ternary Alloys Prepared by Spark Plasma SinteringProperties of Sintered Bronze-Graphite Containing Natural AnhydriteProperties of Sintered Bronze-Graphite Containing Calcium Sulfate Derived from Waste Plaster MoldsThe Effect of Bottom Ash Additions on the Properties of Sintered Bronze-Graphite CompositesEffect of Compaction Pressure and Sintering Time on the Properties of Sintered Cu-10Sn BronzeModification of Microstructure and Tensile Property of Sintered Fe-Cr-Mo-C Steel by Nickel AdditionMicrostructure, Hardness and Wear Properties of Sintered Fe-Mo-Si-C Steels with Spheroidal Graphite Iron/Compacted Graphite Iron-LikeEffect of Aluminum Addition on AlxCoFeMnNiZn Multi-Component ProductionMechanical Properties of As-Exposed Al-SiCp Composite Fabricated by Powder Injection MouldingHardfacing of 3.5% Chromium Cast Steel by Flux Cored Wire Arc Welding ProcessEffect of Impingement Angle on Erosion Resistance of HVOF Sprayed WC-10Co-4Cr Coating on CA6NM SteelStructural Characterization of Reactive DC Magnetron Co-Sputtered Nanocrystalline CrAlN Thin FilmSolid Particle Erosion Resistance of Thermal Sprayed Nickel Alloy CoatingSintered Metal Microstructure Influenced by Deep Rolling and Carburizing ProcessesCorrosion Behavior of Al-Zn-In Sacrificial Anode Alloys Produced by Conventional Casting and Semi-Solid Metal Casting ProcessesDevelopment of Pitting Corrosion Monitoring Device under Sodium Chloride Droplet by Means of Wet-Dry Cyclic MethodImprovement of Structural, Morphological and Mechanical Properties of CrNx Sputtered Thin Films by Vacuum Annealing ProcessStudy of Microstructure and Corrosion Resistance of Zinc Electrodeposits before and after Black ChromatingFactors Affecting on the Corrosion Resistance of Electroless Ni-Zn-P Coated SteelEffect of Post-Curing Temperature and Mechanical Surface Treatment on Shear-Bond Strength of Asbestos-Free Brake PadEffects of Air Exposure Time and Annealing Temperature on Superhydrophobic Surface of Titanium Dioxide FilmsMeta-Heuristics for Engineering Optimisation - Applications to Metal Forming ProcessesDevelopment of a Regression Model of Stk50Eu for a HydrocycloneDevelopment and Characterizations of a Projection StereolithographyFormability Analysis of Fukui Stretch-Drawing and Square Cup Drawing Using Strain and Stress Based Forming Limit CurvesEffect of Feed-Flow Rate in a Solid-Liquid Hydrocyclone Based on Total Solid Recovery EquationBending Limit Curves in Sheet Metal Bending EvaluationFastenerless-Riveting Utilizing Friction Stir Forming for Dissimilar Materials JoiningX-Ray Diffraction Analysis of ZnO Particles Prepared by Microwave PlasmaInfluence of Scanning Parameters on X-Ray Diffraction Peaks of CopperThe Investigation of Ultrasonic Energy Attenuation in AISI 316 Stainless Steel Weld JointStress Measurement in Carbon Steel by Magnetic Barkhausen Noise TechniqueInfluence of Molecular Weight on the Non-Isothermal Melt Crystallization of Biodegradable Poly(D-Lactide)Gelatin Films and its Pregelatinized Starch Blends: Effect of PlasticizersMedicated Pressure Sensitive Adhesive Patches from STR-5L Block Rubber: Effect of Preparation ProcessEffect of Calcium Carbonate on Crystallization Behavior and Morphology of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)Simulation of Irradiation-Based Processing System for Natural Rubber VulcanizationThe Smart Blending for Multilayer Structure of PLA/EVOHMorphology and Properties of Polyoxymethylene/Polypropylene/Microcrystalline Cellulose CompositesEffect of Synthesized Ag Nanoparticles by Using the Different Amounts of Polyvinylpyrrolidone for Ag-Natural Rubber Hybrid Sheets and their Antibacterial PropertiesPhysical and Mechanical Properties of Wood Plastic Composites from Teak Wood Sawdust and High Density Polyethylene (HDPE)Effect of Poly(D-Lactic Acid)-co-Polyethylene Glycol on the Crystallization of Poly(L-Lactic Acid)Effect of Octenyl Succinate Starch on Properties of Tapioca Thermoplastic Starch BlendsPreparation of TiO2/WO3 Composite Nanofibers by ElectrospinningEffect of Poly(Hexamethylene Succinamide) on Crystallization of Poly(L-Lactic Acid)Mechanical Behavior of Polystyrene-Grafted Natural Rubber/Natural Rubber Blend: Effect of Polystyrene Grafting PercentageDegradation of Silica-Reinforced Natural Rubber by UV Radiation and Humidity in SoilDegradation Test of Natural Rubber/Chitosan CompositeLow Haze and Antifog Performance of 2-Layer Poly(Lactic Acid) Based FilmsInfluence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber VulcanizatesMechanical and Thermal Properties of PLA Melt Blended with High Molecular Weight PEG Modified with Peroxide and Organo-ClayPoly(Lactic Acid)-Polybutylene Succinate-Activated Carbon Composite FoamsDevelopment of Water Assisted Solid State Reaction for the Ceramic MaterialsSlip Degassing to Improve the Properties of Slip Cast and Reaction Bonded Si3N4Fabrication of Low Cost Membrane from Anodic Aluminum OxideSynthesis of Nanocrystalline Cobalt Ferrite by the Sonochemical Method in Highly Basic Aqueous SolutionThe Effect of Zirconium Oxide on Properties and Crystallization of Soda-Lime Silicate GlassStructure, Magnetic Property and Energy Band Gap of Fe-Doped NiO Nanoparticles Prepared by Co-Precipitation MethodPiezoelectric and Ferroelectric Properties of KNbO3 Added Bi0.5Na0.5TiO3 CeramicsChemical Composition-Microstructure-Dielectric Constant Relations of Mg-Doped Calcium Titanate Synthesized by Solid State Reaction TechniqueDevelopment of Glass-Ceramics from Soda Lime Silica Glass Waste by Direct Sintering Method for Opal ImitationEffects of Aluminium Contents and Consolidation Techniques on Chemical Composition, Microstructure and Dielectric Properties of Strontium TitanateInfluence of Temperature and Alkaline Activation for Synthesis Zeolite A from Natural KaolinEffects of Ball Milling on the Properties of (Ba1-xCax)(Ti0.92Sn0.08)O3 Lead-Free Ceramicsr-GO/MWCNTs Nanocomposite Film as Electrode Material for SupercapacitorPre-Immobilization of Anaerobic Mixed Culture on Electrode of the Upflow Bio-Filter Circuit Microbial Fuel CellThe Study of Crystallization of Polyfluorene and Fullerene Derivatives in Semiconducting Layer of Organic Solar CellsTwo-Stage Combustion Burner Using Used Engine Oil as FuelPelletization of Iron Oxide Based Sorbents for Hydrogen Sulfide RemovalBaO-Al2O3-SiO2-B2O3 Glass-Ceramic SOFCs Sealant: Effect of ZnO AdditiveMicrowave-Assisted Preparation of Sodium Silicate as Biodiesel Catalyst from Rice Husk AshCharacterisation of NiO-YSZ Porous Anode-Support for Solid Oxide Fuel Cells Fabricated by Ceramic Injection MouldingProcess Optimization and Characterization of YSZ Thin Film Electrolyte on Anode Substrate Prepared by Electrophoretic Deposition TechniqueThe Effect of Calcium-Based Salt on Hydrothermal Carbonization of CorncobInfluence of Bi2O3 on Crystalline Phase Content and Thermal Properties of A?kermanite and Diopside Based Glass-Ceramic Sealant for SOFCsSynthesis of Ternary Semiconductor Silver Bismuth Telluride by Chemical Bath DepositionZeolite Supported Bimetallic Catalyst System: The Effect of Metal Loading for Catalytic Pyrolysis of Jatropha ResidueCharged Iridium(III) Complexes with Varied Side Chain Length in Organic Light Emitting DiodesEffects of Buffer Layer Growth Temperature on Micro-Structures in the Cubic GaN Films Grown on GaAs (001) Substrates by MOVPEEffect of Silica Base Catalyst on Transformation of Methanol to HydrocarbonInvestigation of Physical, Mechanical and Thermal Properties of Building Wall MaterialsGeopolymerization as Cold-Consolidation Techniques for Hazardous and Non-Hazardous WastesInfluence of Portland Cement on Physical, Mechanical and Thermal Properties of Cellular Lightweight ConcreteThe Study on Physical and Thermal Properties of Geopolymer PastesOptimum Partial Replacement of Cement by Nanosilica, Microsilica and Rice Husk Ash for Mass Production of ConcreteEffect of Calcium Carbonate on Compressive Strength and Physical Properties of Alkali-Activated Lightweight ConcreteUse of Waste Glass as a Reinforce Material in Calcined-Kaolin Based GeopolymerEffects of Aluminum Concentrations on Microstructure and Compressive Strength of Porous ConcreteThe Mechanical Properties Study of Waste Bakelite Aggregate Concrete
In Vivo Testing of Sericin-Polyurethane Nanofiber Mats for Wound Healing in RatsFluoride Recharge Ability of Resin-Based Pit and Fissure Sealant with Synthesized Mesoporous Silica FillerComparison of the Release of Aloe vera Extracts from Poly(Vinyl Alcohol) Electrospun Fibers and Hydrogel Films for Wound Healing ApplicationsEffect of Process Parameters on Biomimetic Deposition of Calcium Phosphate on 3D Printed HydroxyapatiteA Preliminary Study of the In Vitro Biocompatibility Testing of Silk Fibroin/Alpha Tricalcium Phosphate Composite Scaffolds for Bone Tissue EngineeringEffect of M-Type Hexaferrites on Mechanical and Magnetic Properties of Hydroxyapatite CeramicsSynthesis and Characterization of Cerium- and Lanthanum Containing Bioactive GlassEffect of Solids Loadings, Sintering Temperatures and Sintering Periods on Microstructure of HydroxyapatiteEffect of Bleaching on Color Change of Stained Resin CompositesPMMA Demonstrated Higher Elastic Modulus and Nanohardness Compared with Polyamide Denture Base MaterialsFlexural Strength and Cytotoxicity of ZCC, a Resin Modified Zinc-Calcium Liner PrototypeThe Effect of Thermoforming on Tear Strength of Ethylene Vinyl Acetate Mouthguard Material in Various ThicknessesThe Use of Three Dimensional Printed Hydroxyapatite Granules in Alveolar Ridge PreservationPreparation of Activated Carbon from Sugarcane Bagasse Waste for the Adsorption Equilibrium and Kinetics of Basic DyeModified Soil Compositions for Removal of Acetaminophen from WastewaterDetermination of Tannin in Coffee Pulp Using Experimental and Theoritical ApprochesExploitation of Ag3PO4 Impregnated Alginate Beads for the Photocatalytic Degradation of Dye Solution under Sunlight IrradiationDevelopment of Specific Surface Area in Carbon Material Prepared from Cassava Tuber Char Using a Chemical Activation Assisted Sonochemical ProcessPerformance Photocatalytic Degradation of Methomyl onto Composite Graphene Oxide/Bismuth Vanadate (GO/BiVO4) NanoparticleThe Photocatalytic Degradation of Methylene Blue Using Bismuth Vanadate (Bi2VO5.5) PowderAdsorption of Reactive Dyes Red 195, Blue 222, and Yellow 145 in Solution with Polyaniline-Chitosan Membrane Using Batch ReactorAdsorption of Reactive Dye (RB 222) in Solution onto Chitosan-Rice Husk Ash Composite Beads Cross-Linked with GlutaraldehydeOn the Application of Electrocoagulation/Flotation (ECF) Technique for Cationic Dye Removals Using Aluminium Electrode and Sodium Dodecyl Sulfate (SDS)Fabrication Study of Hydrophobic Polyurethane Sponge for Oil Absorption ApplicationPreparation, Characterization and Photocatalytic Properties of Rubber-TiO2-rGO Composite Sheets for Dye Decomposition in WastewaterThe Effect of Carboxymethyl Cellulose from Various Agriculture Wastes on the Viscosity and Physical Properties of Low Concentration Solution of SurfactantAdsorptive Properties of Fly Ash Zeolite Synthesized via Microwave and Ultrasonic PretreatmentsUsing ZnO Nanorods Coated Porous Ceramic Monolith to Remove Arsenic from GroundwaterRemoval of Arsenic from Groundwater Using Nano-Metal Oxide AdsorbentsSynthesis of Carbon Nanoparticles from Used Motor Oil and Benzene via Solution Plasma ProcessDevelopment of Oil Palm Empty Fruit Bunch Fiber Reinforced Epoxy Composites for Bumper Beam in AutomobileImprovement of Compressive Strength of Soil by Using Jute Fiber WasteAssessment of Hydrophilic Biochar Effect on Sandy Soil Water RetentionPhoto-Oxidative Degradation Polyethylene Containing Titanium Dioxide and Poly(Ethylene Oxide)Photocatalytic Activity of Cu-Doped Cerium Dioxide NanoparticlesSynthesis and Photocatalytic Activity of Visible-Light Responsive BiOBr/GO CompositesComparison Study of Photocatalytic Activity of Titanium-Rich Materials Derived from Natural Minerals Ores Using Acidic LeachingPhotocatalytic Degradation Study of Titania Sol-Gel Coated on Commercial Unglazed Ceramic TilesPhotocatalytic Comparative Study of TiO2, ZnO, Ag-G-ZnO and Ag-G-TiO2 Nanocomposite Films

Über Autor(innen)

Eds. Peerapong Pinwanich and Akrapol Soisungval