Buch, Englisch, 1360 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2600 g
Buch, Englisch, 1360 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2600 g
ISBN: 978-3-03785-049-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Sponsors and Committees
Preface
Invited speech
How Crystals Form from a Cloud of Atoms
Microstructure, Texture and Residual Stresses Induced by Surface Thermo-Mechanical Treatments
Si 2p Core Level Shifts of the Epitaxial SiON Layer on a SiC(0001), Studied by Photoemissin Spectroscopy
Development of a Highly Active Pt-Catalyst for Selective Oxidation of CO in Excess H2 at Room Temperature
Session A - New energy materials
Investigation on the Removal of B Impurity in Metallurgical Grade Si by Electron Beam Melting
Amorphous Ni-Co-B Catalyst for Hydrolysis of NaBH4 in Alkaline Solution
Electrochemical Studies on Al2O3-Coated Spinel LiMn2O4 for Lithium Ion Batteries
Calcium Evaporation from Metallurgical Grade Silicon by an Electron Beam Melting
Removal of Phosphorus in Metallurgical Grade Silicon Using Electron Beam Melting
Solid Proton Conductor Based on Natural Diatomite
Effect of Pulling Rate on Multicrystalline Silicon Ingot during Directional Solidification
Synthesis of LiFePO4 Cathode Materials by a Chemical Method
Effect of High Volumes of Fly Ash on Flowability and Drying Shrinkage of Engineered Cementitious Composites
An Experimental Research on Electrochemical Impedance Spectra of New High-Specific Energy EDLC
Study of Photocatalytic Activities with Copper Hydroxyphosphate
Post and In Situ Characterization of Strain Control and Crystal Quality in Quantum Well Solar Cell Structure
Preparation and Characteristics of FePO4·xH2O Powder
Fabrication of LSGM Thin Film Electrolyte on LSCM Anode by RF Magnetron Sputtering for IT-SOFC
Phase Equilibria of Boron in Metallurgical Grade Silicon at 1300°C
Experiment Research on Removing Metal Impurities of the Pot Material in Vacuum Directional Solidification
Functionalized Silica Fume for Chromium (VI) Removal from Wasterwater
Oxygen Reduction Reaction on Carbon Supported Ruthenium-Based Electrocatalysts in PEMFC
Effects of Impurities Distribution on the Crystal Structure and Electrical Properties of Multi-Crystalline Silicon Ingots
Transition-Metal Impurities Removal from Metallurgical Grade Silicon by Electron Beam Injection
Resistivity Distribution Characteristics of Metallurgical Silicon Ingot after Directional Solidification
Effect of Heating Treatment on the Resistivity of Polycrystalline Silicon
Session B- Ceramics
Preparation of SiCw/Al2O3 Composite Sheets through Gel-Tape-Casting Process
In Situ High Resolution Transmission Electron Microscopy Studies of High Temperature Behavior of Surface Al2O3 Thin Layer on an AlN Particle
Rapid Synthesis of Molybdenum Disilicide by High-Energy Ball Milling
Effects of CaB2O4 Content on the Sintering Behavior of Hexagonal Boron Nitride
Pozzolanic Activity of Ceramic Polishing Powder as Cementitious Material
Silicon Carbide Base Ceramic Fiber Synthesis from Polycarbosilane-Modified Polymethylsilane Blend Polymers by Melt Spinning
Effects of Rare-Earth Oxides Doping on Microstructures and Properties of Al2O3/TiAl Composites
First Principle Study on Ti4AlN3 Properties under Pressure Effect
Mechanical Properties and Microstructure of KD-1 SiCf/SiC Composites Fabricated by Vapor Silicon Infiltration
Effects of LiF on Sintering Temperature and Microwave Dielectric Properties of (Ca0.3La0.4/3)(Li0.25Nd0.25)TiO3 Ceramics Doped by ZnO-B2O3- SiO2 Glass
Microstructure and Mechanical Properties of AlN Ceramics Sintered with Yttrium Nitrate
Preparation of High Wear-Resistant Ceramic Parts
Surface Treatment of Cubic Boron Nitride Grains Applied to Vitrified Bond Grinding Tools
Influence of La2O3 on the Electrical Properties of Dense SnO2 Electrodes
Effects of Carbon Source on Fabrication and Characterization of Porous Silicon Nitride Ceramics by Carbothermal Reduction
Synthesis of Pr6O11 Doped ZnO-Based Varistors by Pyrogenic Decomposition of Nitrate
Densification of Alumina Ceramics by Infiltration of a Nano-Sized Alumina Sol into Alumina Green Samples
Session C - Metallic glass
Thermodynamic Model and Synthesis of Bulk Metallic Glass in Cu-Zr-Ti System by Mechanical Alloying
Oxidation Kinetic and Diffusion Mechanism Study of a Zr-Based Bulk Metallic Glass Alloy
Bulk Metallic Glassy Composites with Excellent Electrical Conductivity and Enhanced Plasticity Fabricated by Spark Plasma Sintering
Effect of Nb Addition on the Structural and Mechanical Properties of Cu46Zr42Al7Y5 Bulk Metallic Glass
Crystallization of Cu45Zr48Al7 Bulk Metallic Glass
Initial Oxidation Behavior of Zr55Cu30Al10Ni5 Bulk Metallic Glass in Short-Term Stage
Session D - Nanomaterials
Morphologies of Quasicrystal Phase in Ternary Mg-Zn-Y Alloys
4A-Molecular Sieve Synthesis by Microwave Heating with Silicon and Aluminum Materials Produced from the Coal Fly Ash
A New Synthetic Route to Nano Metal Oxides
Preparation and Structural Phase Transitions of Silver Laurate
Catalytic Oxidation of NADH on Gold Electrode Modified by Layer-by- Layer Self-Assembly of Thermostable Diaphorase and Redox Polymer
Construction of Biosensor Based on Glassy Carbon Electrode Modified by Composite Film of Multi-Walled Carbon Nanotubes and Poly(ethylenimine)
The Effect of Strain Rate on the Plastic Deformation Mode of CP-Ti during Surface Nanocrystallization
Band Gap Widening and Quantum Confinement Effects of ZnO Nanowires by First-Principles Calculation
Study on Nanometer Size Structures in the Cr-Mo Electroplated Layer Using Transmission Electron Microscopy and Positron Lifetime Measurement
Microwave Hydrothermal Synthesis of GaN Nanorods
Preparation and Morphological Characteristics of Cellulose Micro/Nano Fibrils
Application of Scanning Confocal Electron Microscopy to Nanomaterials and the Improvement in Resolution by Image Processing
Simulation of Nano-Indentation of Nano SiC Ceramic Micro-Component
Synthesis and Characterization of Nanocrystalline SnO2 Powder
Preparation of Chitosan/Poly(vinyl Alcohol) Blend Nanofibers Containing Ag-SiO2 Nanoparticles via Electrospinning
Electrospun Tin Oxide Nanofibers with Different Precursor Solution
Synthesis and Characterizations of Nanoparticle Sulfur Using Eggshell Membrane as Template
Mechanochemical Polymorphic Transformation of Photocatalyst Material TiO2 and its Dependence on the Milling Operation
Reflective Liquid-Like Films of Silver Nanoparticles
Preparation of Ultra-Fine MgO•Al2O3 Spinel Powder and its Metallurgy Behavior in Low Carbon Steel
Synthesis and Characterization of Andalusite/Polyaniline Composites
Hydrothermal Synthesis of Flower-Like Silver Nanoplate Micro-Assemblies in High Yields
Bio-Medicine Coating on Surface of Magnetic Nanoparticles and its Safety Evaluation
Preparation and Characteristics of MnAlC Nanoparticles by Plasma Arc-Discharge
Urea Effect on Strong Electrorheological Response of Novel Core-Shell Nanoparticles
Session E - Biomaterials
Synthesis and Characterization of a Novel Biomaterial for the Conservation of Historic Stone Buildings and Sculptures
The Comparison between the Borate Glass Ceramic Porous Scaffolds Preparing by the Sintering and Binding Method
Chemically Modification to Corn Stalk as a Natural Material for Oil Absorption
Determination of Holocellulose and Alpha-Cellulose Contents in Triploid Clones of Populus tomentosa Using NIRS
Formation of Porous (Ca, P)-Doped TiO2/Dense Ti Double Coatings on NiTi Alloy
Compatibility and Accelerated Degradation of L-Tyrosine Derived Biodegradable Polycarbonate/PEG Blends
Poly(styrene-Divinylbenzene) Microspheres Prepared by Seed Swelling Polymerization in the Presence of Tung Oil Methyl Esters
Effects of Fiber Orientation Angles and Fluctuation on the Tensile Properties of Sliver-Based Green Composites
Effects of Temperature on the Crystallization of Calcium Carbonate in Egg White Protein Solution System
TiOx Film Formation on NiTi Alloy (100) Surface: Density Functional Theory Investigation
Composites of Poly(lactic Acid) with Rice Straw Fibers Modified by Poly(butyl Acrylate)
Study on the Application of Silane Coupling Agent in Rice Straw/Poly(butylene Succinate) Composites
Structure Characteristics of the Hemifusus tuba Conch Shell
Effects of Hydrophilicity/Hydrophobicity of a Drug on its Release from PLGA Films
Session F - Polymer and composite materials
Structure and CO Gas Sensing Properties of PPy/LaFeO3 Nanocomposites
Relationship between Mechanical Properties of Modified Cementitious Composites and Properties of Polymer Films
Poly(vinyl Alcohol)/Cellulose Nanocomposite Pervaporation Membranes for Ethanol Dehydration
Investigation on Perforation Mechanism of Medium Density Polyethylene
Research on the Porous Structures and Properties of Composite Membranes of Polysulfone and Nanocrystalline Cellulose
Compatibilizing Effects of Poly(ethylene Glycol) on PLA/Cellulose Nanowhiskers Composites
Synthesis and Application of a Modifier to Enhance General Properties of the Polar Wood
Preparation and Application of Starch-Acrylamide-Diallyl Dimethyl Ammonium Chloride Graft Copolymer
Effects of Arc Discharge on Wear Properties of Carbon-Carbon Composites Sliding against Cu Trolley under Electric Current
Study on Compressed Wood with Urea-Formaldehyde Prepolymer
Effect of SiC on the Oxidation Resistance Performance of C/ZrC Composite Prepared by Polymer Infiltration and Pyrolysis Process
Influence of Carbon Nanotubes on Mechanical and Thermal Properties of Glass Fiber Reinforced Vinyl Ester Resin Composites
Experimental Research on the Durability of WPC Wallboard Made of Paper-Aluminum-Plastics Wastes
Natural Fibre/Polypropylene Wrap Spun Yarns and Preforms for Structured Thermoplastic Composites
Effect of Lumen Size on Transverse Thermal Conductivity of Unidirectional Natural Fiber-Polymer Composite via Finite Element Method
The Time Dependent Behavior of Linear Viscoelastic Polymers
Progress of Laminated Materials and Clad Steels Production
Research on Polypropylene Electret Melt-Blown Nonwoven Doped with Nano-Tourmaline
Nonlinear Rate-Dependent Stress-Strain Behavior of Light-Weight Textile Conveyor Belt
Study on Direct-Weld between Bakelite and Aluminum
Electrical Conductivity and Electromagnetic Shielding Effectiveness of CB/ABS Composites
Develop Flexible Piezoelectric PVDF Nano-Fibrous Membrane
Characterization of Asphalt Binders Modified with Hydrated Lime and Limestone Dust
Effect of Hot Extrusion on the Microstructure of In Situ TiB2 Particulate Reinforced Magnesium Matrix Composite
Vibration of Beams with a Single Delamination under Axial Loading
Anticorrosive Properties of Epoxy/Polyurethane IPNs Coatings Modified by Organic Montmorillonite
Session G - Performance evaluation and applications of materials
Influence of Thermal and Thermo-Mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy
Structural Characterization of Wood-Polymer Composite Prepared by In Situ Polymerization of Styrene
Durability Improvement of Bio-Based Material by Polymer
Extensional Rheology of LDPE from Melt Spinning Technique
Microstructure and Properties of High Performance Concrete with Steel Slag Powder
Reliability Design for Creep Rupture Strength of 2.25Cr-1Mo Steel
Experimental Study on Strength and Deformation of Brittle Rock under Different Compression Condition
Molecular Imprinting: Mimicking Molecular Receptors for Antioxidants
Temperature Field Simulation of Nitride Hard Film Irradiated by High-Intensity Pulsed Ion Beam
Thermo-Oxidative Stability of Bismaleimides by TGA/FTIR
Effect and Microscopic Mechanisms of Slag Micropowder on the Reinforcement of CaCO3 Whisker in Cement Composites
Preparation of Chloride Ion Selective Electrode and its Potential Response to Different Chloride Solutions Representing Concrete Environments
The Enhancement of Integrated Properties of WC-Co Coatings Fabricated Using an HVOF Spraying
Investigation on Shock Response of Magnesium Alloy Honeycomb Sandwich Panels under Low Velocity Impact Loading
Hydration Process and Mechanism of Fly Ash in the Cement Mortars
Enhancement of Sensitivity for the Evaluation of Electrical Properties by Modifying the Nano Structure of Microwave AFM Probe
Environmental Degradation of Carbon Fiber Reinforced Polymer (CFRP) and Steel Bond Subjected to Hygrothermal Aging and Loading
Microstructure and Properties of Thin-Wall Part by Laser Metal Deposition Shaping
Surface Impregnation of Concrete Damaged by Elevated Temperature
Features of Grain Boundary Character Distributions in a Austenitic Stainless Steel after Cold Rolling with Low Strain Followed by Single and Two-Step Annealing
Fabrication and Properties of Al/Al-Cu Functionally Graded Material
Flexural Strengthening with Externally Poured Ultra High Toughness Cementitious Composites
Session H - Mechanical behaviour of materials
Rolling Contact Fatigue Property of Low-Temperature Bainite in Surface Layer of a Low Carbon Steel
Effects of Y2O3 on Microstructure and Mechanical Properties of Laser Clad Coatings Reinforced by In Situ Synthesized TiB and TiC
Comparative Study of Magnetic Abrasive Finishing in Free-Form Surface Based on Different Polishing Head
Microstructure and Mechanical Properties of Al2O3/TiAl In Situ Composites Doped with Fe2O3
Static and Dynamic Crushing Behaviors of Aluminum Foam
Numerical Investigation of Temperature and Forming Rate Effect on AA5086 Warm Formability
Surface Effects on Bandgaps of Transverse Waves Propagating in Two Dimensional Phononic Crystals with Nanosized Holes
In Situ Stress Measurement Method Based on X-Ray Diffraction under Biaxial Tensile Loading
Analysis of Two Ball’s Surface Contact Stress Based on Fractal Theory
Mechanical Properties of Centrifugal Casting Al-Cu Alloys
Research on the Self-Thickening Effects in the Process of Fabricating Aluminum Foam Using Semi-Solid Melt by Mechanical Stirring
Studies on Band Structures and Wave Localization Phenomenon of the Randomly Disordered Two-Dimensional Solid-Fluid Phononic Crystals
Progress in Research on Explosion Induced Thixotropy of Concrete
Enhancement in Mechanical Properties of Bamboo by Press Forming
Effect of Rare Earth La Modification on Microstructure and Properties of ZL101 Alloy
Effect of Sputtering Process Conditions on Microstructure and Mechanical Properties of Pt-Fe Nano Film
Effects of Interfacial Friction on the Microstructures of Magnesium-Tin Alloy during Continuous Rheo-Forming Process
Study of Friction Coefficient and Friction Force on Magnetic Abrasive Finishing
Effects of Aluminum Content on Plastic Formability of Wrought Mg Alloy Sheet Produced by Twin-Roll Casting Process
Effects of Strain Rate on the Tensile Deformation of Single-Crystal Copper Films
A Study of Wear Rate Estimation of Coatings by a Numerical Method
End-Mill Evaluation by Measurement of Cutting Force
Experimental Investigation of Damage Characteristics in Steel Honeycomb Sandwich Beams
Effect of Dissimilar Welding on Mechanical Properties of A7050 and A2024 Aluminum Alloy
Influence of High Current Pulsed Electron Beam (HCPEB) Treatment on Wear Resistance of Hypereutectic Al-17.5Si and Al-20Si Alloys
Study on Shrinkage and Cracking Performance of SAP-Modified Concrete
Study on Hydration Mechanism of Phosphoaluminate Cement
Flexural Behavior of Steel Fiber Reinforced Self-Stressing Concrete in Continuous Systems
Effect of Microstructure on Mechanical Properties of Ti-Al Based Alloys
Session I - Material processing and technology
Numerical Simulation and Deformation Research for Cold Enlarging Tube Diameter
The Microstructure Evolution during Annealing in Large Strain Deformed Fe-32%Ni Alloy
Selective Laser Melting of Multi-Component Ni-Based Powder Mixture for Building Metallic Parts
FEM Based Prediction of Residual Stress in Thin-Walled Aluminum Process
Tool Wear and Reactions in 304 Stainless Steel during Friction Stir Welding
Effects of Annealing on Microstructure and Microhardness of TA15 Titanium Alloy Processed by Equal Channel Angular Pressing
Microstructure and Mechanical Properties of Nd:YAG Laser Welded Invar 36 Alloy
Embrittlement of Ti-23Al-17Nb Alloy Laser Welded Joint at 650°C
A Method for Evaluating Intensity of Water Cavitation Peening Processing
Mechanical Properties of Nanocrystalline Diamond Film Prepared by HFCVD
The Preparation of Cr12MoV/40Cr Dual-Metal Composite Die Steel by Vacuum Diffusion Welding
Influence of Pulsed Electric Current on Dendrite Growth of Sn-Bi Alloy via Real-Time Observation
In Situ TiB2 Reinforced Al-12Si Alloy Composites by Semisolid Processing
Preparation of Semisolid A356 Alloy by a Cooling Slope Processing
Effects of AlN Particles and Electromagnetic Stirring on As-Cast Structure of AZ31 Alloys
The Thermal Conductivity Analysis of Sip/Al Base Composites
Preparation and Properties of 2D C/SiC Composites by CLVD Processing
Fe-Cr-C-TiC High-Chromium Fe-Based Ceramic Composite Coating Prepared by PTA Weld-Surfacing Process
Microstructure and Wear-Resisting Property of Submerged-Arc Welding Fe-Cr-C Ceramic Coating Added Alloy Powder
Effect of Electrode Force on Expulsion in Resistance Spot Welding with Initial Gap
Experimental Research on Making Aerated Concrete by Petroleum Coke Desulfuration Residue
Fabrication of SS316L/Ni25 Functionally Gradient Materials Using Laser Engineered Net Shaping
Casting of Clad Strip by a Roll Caster
Roll Casting of Al-SiCp Strip
A Study of Nuclear of Interest Martensitic Steels and FeCr ODS Alloys Using Small Angle Neutron Scattering
Fabrication of W-ZrC Cermets by Reactive Melt Infiltration with Polycarbosilane as Preforms’ Adhesive
A New Technology for Producing Bimetal Rods
Preparation of Polytetrafluoroethylene Ultrafine Fiber Mats with Electrospinning Process
On the Crack Defect of CrZrCu Alloy DC Casting Ingot
Microstructural Characterization of a Fe-Based Compostie Reinforced by TiC
Study on the Reaction Mechanism of Al-ZrO2-B4C System
Behavior of Hydrogen during Electroslag Remelting Process
Surface Modification and Preparation of High Purity Nanometer Magnesium Hydroxide Using Impinging Stream
Manufacturing AIS
