Sonstiges, Englisch, 1360 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1360 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-03785-050-3
Verlag: Trans Tech Publications
This two-volume set comprises more than 306 peer-reviewed papers, grouped together under the headings of: invited papers, new energy materials, ceramics, metallic glasses, nanomaterials, biomaterials, polymer and composite materials, performance evaluation and applications of materials, mechanical behaviour of materials, materials processing and technology, modeling and simulation, catalyst materials, functional materials, smart materials and intelligent structures, coatings and thin films. This book will provide a valuable reference source for researchers in the field of advanced materials science and technology.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
How Crystals Form from a Cloud of AtomsMicrostructure, Texture and Residual Stresses Induced by Surface Thermo-Mechanical TreatmentsSi 2p Core Level Shifts of the Epitaxial SiON Layer on a SiC(0001), Studied by Photoemissin SpectroscopyDevelopment of a Highly Active Pt-Catalyst for Selective Oxidation of CO in Excess H2 at Room TemperatureInvestigation on the Removal of B Impurity in Metallurgical Grade Si by Electron Beam MeltingAmorphous Ni-Co-B Catalyst for Hydrolysis of NaBH4 in Alkaline SolutionElectrochemical Studies on Al2O3-Coated Spinel LiMn2O4 for Lithium Ion BatteriesCalcium Evaporation from Metallurgical Grade Silicon by an Electron Beam MeltingRemoval of Phosphorus in Metallurgical Grade Silicon Using Electron Beam MeltingSolid Proton Conductor Based on Natural DiatomiteEffect of Pulling Rate on Multicrystalline Silicon Ingot during Directional SolidificationSynthesis of LiFePO4 Cathode Materials by a Chemical MethodEffect of High Volumes of Fly Ash on Flowability and Drying Shrinkage of Engineered Cementitious CompositesAn Experimental Research on Electrochemical Impedance Spectra of New High-Specific Energy EDLCStudy of Photocatalytic Activities with Copper HydroxyphosphatePost and In Situ Characterization of Strain Control and Crystal Quality in Quantum Well Solar Cell StructurePreparation and Characteristics of FePO4?xH2O PowderFabrication of LSGM Thin Film Electrolyte on LSCM Anode by RF Magnetron Sputtering for IT-SOFCPhase Equilibria of Boron in Metallurgical Grade Silicon at 1300?CExperiment Research on Removing Metal Impurities of the Pot Material in Vacuum Directional SolidificationFunctionalized Silica Fume for Chromium (VI) Removal from WasterwaterOxygen Reduction Reaction on Carbon Supported Ruthenium-Based Electrocatalysts in PEMFCEffects of Impurities Distribution on the Crystal Structure and Electrical Properties of Multi-Crystalline Silicon IngotsTransition-Metal Impurities Removal from Metallurgical Grade Silicon by Electron Beam InjectionResistivity Distribution Characteristics of Metallurgical Silicon Ingot after Directional SolidificationEffect of Heating Treatment on the Resistivity of Polycrystalline SiliconPreparation of SiCw/Al2O3 Composite Sheets through Gel-Tape-Casting Process
In Situ High Resolution Transmission Electron Microscopy Studies of High Temperature Behavior of Surface Al2O3 Thin Layer on an AlN ParticleRapid Synthesis of Molybdenum Disilicide by High-Energy Ball MillingEffects of CaB2O4 Content on the Sintering Behavior of Hexagonal Boron NitridePozzolanic Activity of Ceramic Polishing Powder as Cementitious MaterialSilicon Carbide Base Ceramic Fiber Synthesis from Polycarbosilane-Modified Polymethylsilane Blend Polymers by Melt SpinningEffects of Rare-Earth Oxides Doping on Microstructures and Properties of Al2O3/TiAl CompositesFirst Principle Study on Ti4AlN3 Properties under Pressure EffectMechanical Properties and Microstructure of KD-1 SiCf/SiC Composites Fabricated by Vapor Silicon InfiltrationEffects of LiF on Sintering Temperature and Microwave Dielectric Properties of (Ca0.3La0.4/3)(Li0.25Nd0.25)TiO3 Ceramics Doped by ZnO-B2O3- SiO2 GlassMicrostructure and Mechanical Properties of AlN Ceramics Sintered with Yttrium NitratePreparation of High Wear-Resistant Ceramic PartsSurface Treatment of Cubic Boron Nitride Grains Applied to Vitrified Bond Grinding ToolsInfluence of La2O3 on the Electrical Properties of Dense SnO2 ElectrodesEffects of Carbon Source on Fabrication and Characterization of Porous Silicon Nitride Ceramics by Carbothermal ReductionSynthesis of Pr6O11 Doped ZnO-Based Varistors by Pyrogenic Decomposition of NitrateDensification of Alumina Ceramics by Infiltration of a Nano-Sized Alumina Sol into Alumina Green SamplesThermodynamic Model and Synthesis of Bulk Metallic Glass in Cu-Zr-Ti System by Mechanical AlloyingOxidation Kinetic and Diffusion Mechanism Study of a Zr-Based Bulk Metallic Glass AlloyBulk Metallic Glassy Composites with Excellent Electrical Conductivity and Enhanced Plasticity Fabricated by Spark Plasma SinteringEffect of Nb Addition on the Structural and Mechanical Properties of Cu46Zr42Al7Y5 Bulk Metallic GlassCrystallization of Cu45Zr48Al7 Bulk Metallic GlassInitial Oxidation Behavior of Zr55Cu30Al10Ni5 Bulk Metallic Glass in Short-Term StageMorphologies of Quasicrystal Phase in Ternary Mg-Zn-Y Alloys4A-Molecular Sieve Synthesis by Microwave Heating with Silicon and Aluminum Materials Produced from the Coal Fly AshA New Synthetic Route to Nano Metal OxidesPreparation and Structural Phase Transitions of Silver LaurateCatalytic Oxidation of NADH on Gold Electrode Modified by Layer-by- Layer Self-Assembly of Thermostable Diaphorase and Redox PolymerConstruction of Biosensor Based on Glassy Carbon Electrode Modified by Composite Film of Multi-Walled Carbon Nanotubes and Poly(ethylenimine)The Effect of Strain Rate on the Plastic Deformation Mode of CP-Ti during Surface NanocrystallizationBand Gap Widening and Quantum Confinement Effects of ZnO Nanowires by First-Principles CalculationStudy on Nanometer Size Structures in the Cr-Mo Electroplated Layer Using Transmission Electron Microscopy and Positron Lifetime MeasurementMicrowave Hydrothermal Synthesis of GaN NanorodsPreparation and Morphological Characteristics of Cellulose Micro/Nano FibrilsApplication of Scanning Confocal Electron Microscopy to Nanomaterials and the Improvement in Resolution by Image ProcessingSimulation of Nano-Indentation of Nano SiC Ceramic Micro-ComponentSynthesis and Characterization of Nanocrystalline SnO2 PowderPreparation of Chitosan/Poly(vinyl Alcohol) Blend Nanofibers Containing Ag-SiO2 Nanoparticles via ElectrospinningElectrospun Tin Oxide Nanofibers with Different Precursor SolutionSynthesis and Characterizations of Nanoparticle Sulfur Using Eggshell Membrane as TemplateMechanochemical Polymorphic Transformation of Photocatalyst Material TiO2 and its Dependence on the Milling OperationReflective Liquid-Like Films of Silver NanoparticlesPreparation of Ultra-Fine MgO?Al2O3 Spinel Powder and its Metallurgy Behavior in Low Carbon SteelSynthesis and Characterization of Andalusite/Polyaniline CompositesHydrothermal Synthesis of Flower-Like Silver Nanoplate Micro-Assemblies in High YieldsBio-Medicine Coating on Surface of Magnetic Nanoparticles and its Safety EvaluationPreparation and Characteristics of MnAlC Nanoparticles by Plasma Arc-DischargeUrea Effect on Strong Electrorheological Response of Novel Core-Shell NanoparticlesSynthesis and Characterization of a Novel Biomaterial for the Conservation of Historic Stone Buildings and SculpturesThe Comparison between the Borate Glass Ceramic Porous Scaffolds Preparing by the Sintering and Binding MethodChemically Modification to Corn Stalk as a Natural Material for Oil AbsorptionDetermination of Holocellulose and Alpha-Cellulose Contents in Triploid Clones of Populus tomentosa Using NIRSFormation of Porous (Ca, P)-Doped TiO2/Dense Ti Double Coatings on NiTi AlloyCompatibility and Accelerated Degradation of L-Tyrosine Derived Biodegradable Polycarbonate/PEG BlendsPoly(styrene-Divinylbenzene) Microspheres Prepared by Seed Swelling Polymerization in the Presence of Tung Oil Methyl EstersEffects of Fiber Orientation Angles and Fluctuation on the Tensile Properties of Sliver-Based Green CompositesEffects of Temperature on the Crystallization of Calcium Carbonate in Egg White Protein Solution SystemTiOx Film Formation on NiTi Alloy (100) Surface: Density Functional Theory InvestigationComposites of Poly(lactic Acid) with Rice Straw Fibers Modified by Poly(butyl Acrylate)Study on the Application of Silane Coupling Agent in Rice Straw/Poly(butylene Succinate) CompositesStructure Characteristics of the Hemifusus tuba Conch ShellEffects of Hydrophilicity/Hydrophobicity of a Drug on its Release from PLGA FilmsStructure and CO Gas Sensing Properties of PPy/LaFeO3 NanocompositesRelationship between Mechanical Properties of Modified Cementitious Composites and Properties of Polymer FilmsPoly(vinyl Alcohol)/Cellulose Nanocomposite Pervaporation Membranes for Ethanol DehydrationInvestigation on Perforation Mechanism of Medium Density PolyethyleneResearch on the Porous Structures and Properties of Composite Membranes of Polysulfone and Nanocrystalline CelluloseCompatibilizing Effects of Poly(ethylene Glycol) on PLA/Cellulose Nanowhiskers CompositesSynthesis and Application of a Modifier to Enhance General Properties of the Polar WoodPreparation and Application of Starch-Acrylamide-Diallyl Dimethyl Ammonium Chloride Graft CopolymerEffects of Arc Discharge on Wear Properties of Carbon-Carbon Composites Sliding against Cu Trolley under Electric CurrentStudy on Compressed Wood with Urea-Formaldehyde PrepolymerEffect of SiC on the Oxidation Resistance Performance of C/ZrC Composite Prepared by Polymer Infiltration and Pyrolysis ProcessInfluence of Carbon Nanotubes on Mechanical and Thermal Properties of Glass Fiber Reinforced Vinyl Ester Resin CompositesExperimental Research on the Durability of WPC Wallboard Made of Paper-Aluminum-Plastics WastesNatural Fibre/Polypropylene Wrap Spun Yarns and Preforms for Structured Thermoplastic CompositesEffect of Lumen Size on Transverse Thermal Conductivity of Unidirectional Natural Fiber-Polymer Composite via Finite Element MethodThe Time Dependent Behavior of Linear Viscoelastic PolymersProgress of Laminated Materials and Clad Steels ProductionResearch on Polypropylene Electret Melt-Blown Nonwoven Doped with Nano-TourmalineNonlinear Rate-Dependent Stress-Strain Behavior of Light-Weight Textile Conveyor BeltStudy on Direct-Weld between Bakelite and AluminumElectrical Conductivity and Electromagnetic Shielding Effectiveness of CB/ABS CompositesDevelop Flexible Piezoelectric PVDF Nano-Fibrous MembraneCharacterization of Asphalt Binders Modified with Hydrated Lime and Limestone DustEffect of Hot Extrusion on the Microstructure of In Situ TiB2 Particulate Reinforced Magnesium Matrix CompositeVibration of Beams with a Single Delamination under Axial LoadingAnticorrosive Properties of Epoxy/Polyurethane IPNs Coatings Modified by Organic MontmorilloniteInfluence of Thermal and Thermo-Mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr AlloyStructural Characterization of Wood-Polymer Composite Prepared by In Situ Polymerization of StyreneDurability Improvement of Bio-Based Material by PolymerExtensional Rheology of LDPE from Melt Spinning TechniqueMicrostructure and Properties of High Performance Concrete with Steel Slag PowderReliability Design for Creep Rupture Strength of 2.25Cr-1Mo SteelExperimental Study on Strength and Deformation of Brittle Rock under Different Compression ConditionMolecular Imprinting: Mimicking Molecular Receptors for AntioxidantsTemperature Field Simulation of Nitride Hard Film Irradiated by High-Intensity Pulsed Ion BeamThermo-Oxidative Stability of Bismaleimides by TGA/FTIREffect and Microscopic Mechanisms of Slag Micropowder on the Reinforcement of CaCO3 Whisker in Cement CompositesPreparation of Chloride Ion Selective Electrode and its Potential Response to Different Chloride Solutions Representing Concrete EnvironmentsThe Enhancement of Integrated Properties of WC-Co Coatings Fabricated Using an HVOF SprayingInvestigation on Shock Response of Magnesium Alloy Honeycomb Sandwich Panels under Low Velocity Impact LoadingHydration Process and Mechanism of Fly Ash in the Cement MortarsEnhancement of Sensitivity for the Evaluation of Electrical Properties by Modifying the Nano Structure of Microwave AFM ProbeEnvironmental Degradation of Carbon Fiber Reinforced Polymer (CFRP) and Steel Bond Subjected to Hygrothermal Aging and LoadingMicrostructure and Properties of Thin-Wall Part by Laser Metal Deposition ShapingSurface Impregnation of Concrete Damaged by Elevated TemperatureFeatures of Grain Boundary Character Distributions in a Austenitic Stainless Steel after Cold Rolling with Low Strain Followed by Single and Two-Step AnnealingFabrication and Properties of Al/Al-Cu Functionally Graded MaterialFlexural Strengthening with Externally Poured Ultra High Toughness Cementitious CompositesRolling Contact Fatigue Property of Low-Temperature Bainite in Surface Layer of a Low Carbon SteelEffects of Y2O3 on Microstructure and Mechanical Properties of Laser Clad Coatings Reinforced by In Situ Synthesized TiB and TiCComparative Study of Magnetic Abrasive Finishing in Free-Form Surface Based on Different Polishing HeadMicrostructure and Mechanical Properties of Al2O3/TiAl In Situ Composites Doped with Fe2O3Static and Dynamic Crushing Behaviors of Aluminum FoamNumerical Investigation of Temperature and Forming Rate Effect on AA5086 Warm FormabilitySurface Effects on Bandgaps of Transverse Waves Propagating in Two Dimensional Phononic Crystals with Nanosized Holes
In Situ Stress Measurement Method Based on X-Ray Diffraction under Biaxial Tensile LoadingAnalysis of Two Ball?s Surface Contact Stress Based on Fractal TheoryMechanical Properties of Centrifugal Casting Al-Cu AlloysResearch on the Self-Thickening Effects in the Process of Fabricating Aluminum Foam Using Semi-Solid Melt by Mechanical StirringStudies on Band Structures and Wave Localization Phenomenon of the Randomly Disordered Two-Dimensional Solid-Fluid Phononic CrystalsProgress in Research on Explosion Induced Thixotropy of ConcreteEnhancement in Mechanical Properties of Bamboo by Press FormingEffect of Rare Earth La Modification on Microstructure and Properties of ZL101 AlloyEffect of Sputtering Process Conditions on Microstructure and Mechanical Properties of Pt-Fe Nano FilmEffects of Interfacial Friction on the Microstructures of Magnesium-Tin Alloy during Continuous Rheo-Forming ProcessStudy of Friction Coefficient and Friction Force on Magnetic Abrasive FinishingEffects of Aluminum Content on Plastic Formability of Wrought Mg Alloy Sheet Produced by Twin-Roll Casting ProcessEffects of Strain Rate on the Tensile Deformation of Single-Crystal Copper FilmsA Study of Wear Rate Estimation of Coatings by a Numerical MethodEnd-Mill Evaluation by Measurement of Cutting ForceExperimental Investigation of Damage Characteristics in Steel Honeycomb Sandwich BeamsEffect of Dissimilar Welding on Mechanical Properties of A7050 and A2024 Aluminum AlloyInfluence of High Current Pulsed Electron Beam (HCPEB) Treatment on Wear Resistance of Hypereutectic Al-17.5Si and Al-20Si AlloysStudy on Shrinkage and Cracking Performance of SAP-Modified ConcreteStudy on Hydration Mechanism of Phosphoaluminate CementFlexural Behavior of Steel Fiber Reinforced Self-Stressing Concrete in Continuous SystemsEffect of Microstructure on Mechanical Properties of Ti-Al Based AlloysNumerical Simulation and Deformation Research for Cold Enlarging Tube DiameterThe Microstructure Evolution during Annealing in Large Strain Deformed Fe-32%Ni AlloySelective Laser Melting of Multi-Component Ni-Based Powder Mixture for Building Metallic PartsFEM Based Prediction of Residual Stress in Thin-Walled Aluminum ProcessTool Wear and Reactions in 304 Stainless Steel during Friction Stir WeldingEffects of Annealing on Microstructure and Microhardness of TA15 Titanium Alloy Processed by Equal Channel Angular PressingMicrostructure and Mechanical Properties of Nd:YAG Laser Welded Invar 36 AlloyEmbrittlement of Ti-23Al-17Nb Alloy Laser Welded Joint at 650?CA Method for Evaluating Intensity of Water Cavitation Peening ProcessingMechanical Properties of Nanocrystalline Diamond Film Prepared by HFCVDThe Preparation of Cr12MoV/40Cr Dual-Metal Composite Die Steel by Vacuum Diffusion WeldingInfluence of Pulsed Electric Current on Dendrite Growth of Sn-Bi Alloy via Real-Time Observation
In Situ TiB2 Reinforced Al-12Si Alloy Composites by Semisolid ProcessingPreparation of Semisolid A356 Alloy by a Cooling Slope ProcessingEffects of AlN Particles and Electromagnetic Stirring on As-Cast Structure of AZ31 AlloysThe Thermal Conductivity Analysis of Sip/Al Base CompositesPreparation and Properties of 2D C/SiC Composites by CLVD ProcessingFe-Cr-C-TiC High-Chromium Fe-Based Ceramic Composite Coating Prepared by PTA Weld-Surfacing ProcessMicrostructure and Wear-Resisting Property of Submerged-Arc Welding Fe-Cr-C Ceramic Coating Added Alloy PowderEffect of Electrode Force on Expulsion in Resistance Spot Welding with Initial GapExperimental Research on Making Aerated Concrete by Petroleum Coke Desulfuration ResidueFabrication of SS316L/Ni25 Functionally Gradient Materials Using Laser Engineered Net ShapingCasting of Clad Strip by a Roll CasterRoll Casting of Al-SiCp StripA Study of Nuclear of Interest Martensitic Steels and FeCr ODS Alloys Using Small Angle Neutron ScatteringFabrication of W-ZrC Cermets by Reactive Melt Infiltration with Polycarbosilane as Preforms? AdhesiveA New Technology for Producing Bimetal RodsPreparation of Polytetrafluoroethylene Ultrafine Fiber Mats with Electrospinning ProcessOn the Crack Defect of CrZrCu Alloy DC Casting IngotMicrostructural Characterization of a Fe-Based Compostie Reinforced by TiCStudy on the Reaction Mechanism of Al-ZrO2-B4C SystemBehavior of Hydrogen during Electroslag Remelting ProcessSurface Modification and Preparation of High Purity Nanometer Magnesium Hydroxide Using Impinging StreamManufacturing AISI316L Components via Selective Laser Melting Coupled with Hot Isostatic PressingEffects of Low Frequency Electromagnetic Field on the Solidification Structure of 6063 Aluminum Alloy during Hot-Top CastingMicrowave Absorption Properties of one Thin Absorber Based on Carbonyl-Iron PowderNumerical Simulation of Temperature Field during Laser Deep Penetration WeldingFluoridated Hydroxyapatite/Carbon Nanotubes Composite Coating Fabricated by Radio Frequency Magnetron SputteringRemoval of Iron from Metallurgical Grade Silicon with Pressure LeachingEffects of Li2CO3 on Properties of Mould Flux for High Speed Continuous CastingProcess Optimization Simulation of Cast-Steel Rear AxleDeformation Mechanism Analysis of Hydro-Drawing Parabola Workpieces Based on DYNAFORMConstitutive Inequalities for the Damage of Elastic-Brittle Materials? Phase Formation Mechanism at Cemented Carbide YG30/Steel 1045 Joints during Tungsten-Inert-Gas Arc WeldingAlloy Development and Process Optimization for a New High Strength and High Toughness Titanium Alloys Ti-63Finite Element Simulation of Vacuum Hot Bulge Forming Process of Reactor Coolant Pump Rotor-CanNumerical Investigation into Movement Behavior of Metal Powder during Hot Isostatic PressingThermo-Mechanical Analysis of CLAM Steel and SS316L in the First Wall for ITERFinite Element Simulation of Vacuum Hot Bulge Forming of Titanium Alloy Cylindrical WorkpieceNumerical Simulation and Experiment of Linear Friction Welding Process of Ti6Al4V AlloySimulation of Discrete Dislocation Statics and Dynamics of Magnesium FoamModeling of the Influence of Initial Grain Sizes on Dynamic Recrystallization Using a Cellular Automaton ModelMulti-Scale Modelling of Low Index Rutile TiO2 Surfaces with a Tight-Binding Variable-Charge Model and Ab Initio CalculationsSimulation Study on Horizontal Continuous Casting of Round Copper Billet with Electromagnetic StirringInvestigation of Concrete Filling Result in a New Concrete Filled Steel Tube Structure Using Concrete Visual ModelAtomistic Simulation of Deformation Behavior at a Crack Tip in Magnesium Single CrystalMolecular Dynamics Simulations on Sliding Friction between Amorphous Si-DLC FilmsNumerical Analysis on Thermal Field in Rheocasting-Rolling of Semi-Solid MagnesiumThermodynamic Calculations and Kinetic Simulations of some Advanced MaterialsFinite Element Simulation of Microstructural Evolution during Inertia Friction Welding Process of Superalloy GH4169FEM Analysis and Verification of Stress Intensity Factor of Dugdale Model in Silicon Steel Plate under Biaxial Tensile LoadModeling Nucleation of Hydrogen Induced Cracking in Steels during Sour ServiceNumerical Simulation of Solidification Process for a Machine Tool BedMicro/Meso Scale Metallic Sheet Forming Process Analysis Based on the Strain Gradient Plasticity TheoryTransient 3D Simulation of a Submerged-Arc Furnace for Production of MgO Single CrystalSheet Material Property Effects upon Dynamic Behavior in Self-Pierce Riveted JointsModeling and Simulation of Robotic Material Removal Process in Uncertainty EnvironmentSimulation of Axi-Symmetrical Forging Process by ?Inverse Approach?Viscosity of Sn-Cu Solders Investigated by Molecular DynamicsFirst-Principles Study of Adsorption Properties of NO2 on Boron-Doped Silicon Carbide NanotubeComparative Temperature Field Analysis of MgO Single Crystal Furnace Using Finite Element and Fuzzy MethodsSynthesis and Performance of Perovskite YMnxFe1-xO3 PhotocatalystOrthogonal Experimental Study on Preparation Conditions of V2O5/TiO2 Catalysts for the SCR of NO with NH3Application of Hydrophobic Silica/Fiber Composite Aerogels in Organic AbsorptionGreen Synthesis of Nano-Size Silver Particles Colloidal SolSynergy Effect of Ce/N Co-Doping on Anatase TiO2 Photocatalysts from First Principles CalculationVariation Mechanism of Aspiration Pressure at the Tip of Metal Delivery Tube in Supersonic AtomizationEnhanced Photocatalytic Activity of BiVO4 for Water Oxidation by Mo DopingPropagation of SH Waves through an Interface between a Phononic Crystal and a Uniform SolidAdsorption of H2S and SO2 on Activated Carbon Fibers Modified by Ammonium NitrateSynthesis and Characterization of Mesoporous Silicon Spheres from Solid Silica SpheresStudy on Ultra-Strength Mortar Prepared with Mineral AdmixtureDirection-Independent Band Gaps Extension Based on Thue-Morse Photonic Heterostructures Containing Negative-Index MaterialsA New Smart Damage Sensor Using Mechanoluminescence MaterialFlexural Vibration Band Gaps in a Ternary Phononic Crystal Thin PlateSynthesis and Characterization of Sr3MgSi2O8:Eu2+, Dy3+ Phosphor Prepared by a Chemical Solution MethodMonodisperse, Luminescent Silica Spheres Synthesized by a New MethodGrowth Spindle-Like ZnO Nanocrystalline Thin Films on Nickel Layers by Dc Magnetron Sputtering and its Thermal Annealing PropertiesElectrical Properties of Ag?La0.67Sr0.33MnO3The Enhanced Magnetoresistance Effect of La0.67Sr0.33MnO3 with Pentavalent Ions AdditionPreparation of Oil Core/Polyelectrolyte Shell Microcapsules by a Coacervation MethodDetermination of Refractive Indices and Linear Coefficients of Thermal Expansion for Development of Athermal GlassInvestigation on Post Treatment of Nano-Size Silver Conductive FilmMicrostructure and Wear Properties of TiC/7075 Composites by In Situ Reaction Liquidus Curve Casting MethodPreparation of Al-Sc Alloy by LiF-ScF3-ScCl3 Molten Salt ElectrolysisPiezoelectric Micromachined Ultrasonic Transducer with a Dome-Shaped Single Layer StructureQuantitatively Characterizing Damages on Steel Beams by Using PZT Impedance MethodA Modified Electro-Mechanical Impedance Model for Dynamic Analysis of PZT Sensor Coupled with Beam StructurePhase Analyses of a TtPt Alloy Synthesized by Spark Plasma SinteringAn Experimental Investigation of Mechanical Strength of Knotted NiTi SMA Fiber CompositeAn Analysis of Phase Transformations for Porous Shape Memory Alloy Considering Hydrostatic StressDynamic Responses of TiNi Phase Transformation Cylindrical Shell under Radial Impact LoadEffect of Stress and Magnetic Field on Young?s Modulus of Tb0.3Dy0.7Fe2 Oriented AlloyVIMP Curing Process and Health Monitoring of Vinyl Ester Composites Based on Fiber Bragg Grating SensorsStudy on the Temperature-Sensitive Properties of Carbon Fiber-Reinforced MortarThree Layers Weaved once Structure Design and Performance Testing for Fabric Keyboard SwitchElasto-Plastic Earthquake Response Analysis of High-Speed Railway Bridge Fabricated Isolation BearingsUniform High Magnetostrictive Properties of Terfenol-D Composites Prepared by a Dry ProcessEffects of Curing Method on the Gas Separation Performance of Phenolic Resin/Poly(vinyl Alcohol)-Based Carbon Membrane MaterialsPreparation and Characteristics of Integral Water Repellent Cement-Based MaterialsEffect of Negative Pulse Voltage on the Microstructure and Corrosion Resistance of Microarc Oxidation Film of A356 Aluminum AlloyPreparation and Properties of the Organic-Inorganic Composite Coating on Aluminum AlloyInternal Stress and Grain Size Effect on the Phase Stabilization of ZrO2 Deposited by MOCVDEnhanced Surface Properties Induced by High Current Pulsed Electron Beam (HCPEB) TreatmentInfluence of Al2O3 Buffer Layers on the Properties of Indium?Tin Oxide Films on PET Substrate by RF-Magnetron SputteringThe Fabrication of W-Cu Modified Layers on the Surface of the Continuous Casting Machine Mould Copper Plate by InfiltrationA Method for Ultrasonic Characterization of Density, Thickness and Velocity of Homogeneous CoatingCorrelating Ultrasonic Velocity and Porosity Using FDTD Method Based on Random Pores ModelZrC-Zr2Si Coating on Carbon Fiber Reinforced Silicon Carbide Matrix Composites Prepared by Pack Cementation MethodFormation of TiO2/Ti Composite Photocatalyst Film by 2-Step Mechanical Coating TechniquePerformance Improvement of TiO2/Ti Composite Photocatalyst Film by Heat Oxidation TreatmentPreparation and Electrical Properties of the Polyimide/Multi-Walled Carbon Nanotubes (MWNTs) NanocompositesAnalysis on the Mechanical and Electrical Properties of PI/MWNTs Nano-Hybrid FilmsTribological Properties of Plasma Sprayed Self-Lubricating NiCr/Cr3C2-BN Composite CoatingsThe Competitive Reactions in Atomic Layer Deposition of HfO2, ZrO2 and Al2O3 on Hydroxylated Si(100) Surfaces: A Density Functional Theory StudyImprovement in Wear and Corrosive Wear Resistance of Ti6Al4V Alloy by Double Glow Plasma Surface Alloying with W-Mo and W-Mo-NHighly Textured (111) Pt Substrates for Preferred Orientation Controlled AlN FilmsAntiferromagnetic Layer Thickness Dependence of Exchange Bias in Sputter-Deposited Co/CoO/Co TrilayerA Study of Yellow Solvent Dyes in Coated Paper Ink-Jet Ink System and Printing TestErosion Wear Resistance of TiAlCrN Coating on Stainless Steel Impacted by Solid ParticlesRelationship between Structure and Functional Properties of the ZnO:Al Thin FilmsEffects of Negative Bias Pulse on Characteristics of a-C:H Films Prepared by Plasma-Based Ion ImplantationThe Surface Coating of YAG:Ce Phosphors with ZnO Nanoparticles for White LEDPreparation of P-Type Microcrystal Si:H Films by ECR-PECVDResearch on Corrosion-Resistance of High Velocity Arc Spray Coatings on Surface of Steel Structure in Splash Zone EnvironmentEffect of Gas Temperature on the Particle Deposition Characteristics and Coating Microstructure by Cold SprayStudy on WC-Ni60 Complex Coating by High Frequency Induction CladdingStudy on Photoluminescence of Porous Silicon with Cu DepositionMicrostructure and Corrosion Resistance of TiN Coating on HSS by Pulsed Bias Cathodic Arc Ion PlatingEffect of the Si3N4 Coating on the Mc-Si Ingot in the Process of Multicrystalline Silicon Purification by Metallurgical MethodsMicrostructure Modifications Induced by Pulsed Electron Beam in Steels
