Sonstiges, Englisch, Band Volume 896, 762 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 896, 762 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-726-4
Verlag: Trans Tech Publications
The 157 papers are grouped as follows:
Chapter 1: Nanofibers and Membranes,
Chapter 2: Nanoparticles and Powders,
Chapter 3: Thick and Thin Films,
Chapter 4: Biomaterials,
Chapter 5: Electronic Materials,
Chapter 6: Magnetic Materials,
Chapter 7: Optical Materials,
Chapter 8: Composites, Ceramics, and Alloys,
Chapter 9: Measurement and Characterization Techniques.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
The Role and Prospect of Nanomaterials in Polymeric Membrane for Water and Wastewater Treatment: A State-of-the-Art OverviewSynthesis of Low Fouling Porous Polymeric MembranesMass Production of Stacked Styrofoam Nanofibers Using a Multinozzle and Drum Collector Electrospinning SystemTransparent and Conductive Fluorinated-Tin Oxide Prepared by Atmospheric Deposition TechniqueGas Sensing Using Static and Dynamic Modes Piezoresistive MicrocantileverOne-Step Fabrication of Short Nanofibers by Electrospinning: Effect of Needle Size on Nanofiber LengthCarbon Dioxide Permeation Characteristics in Asymmetric Polysulfone Hollow Fiber Membrane: Effect of Constant Heating and Progressive HeatingElectrospinning of Poly(vinyl alcohol)/Chitosan via Multi-Nozzle Spinneret and Drum CollectorA Simple Way of Producing Nano Anatase TiO2 in Polyvinyl Alcohol FibersThe Crystal Structure, Conductivity Character and Ionic Migration of Samarium Doped-Ceria (SDC) and its Composite with Sodium CarbonatePreparation of Sulfonate Grafted Silica/Chitosan-Based Proton Exchange MembraneSynthesis and Characterization of Solid Polymer Electrolyte from N-Succinyl Chitosan and Lithium PerchlorateEpoxidised Natural Rubber Based Polymer Electrolyte Systems for Electrochemical Device ApplicationsEggs Shell Membrane as Natural Separator for Supercapacitor ApplicationsTitania Coated Ceramic Membrane from Clay and Muntilan Sand for Wastewater Filter ApplicationUtilization of Fly Ash as Ceramic Support Mixture for the Synthesis of Zeolite Pervaporation MembraneSynthesis and Characterization of Nanostructured Tungsten Oxide by Hard Template MethodExcited-State Proton Transfer in Fluorescent Photoactive Yellow Protein Containing 7-HydroxycoumarinEffect of Heating Time on Atrazine-Based MIP Materials Synthesized via the Cooling-Heating MethodPreparation of Orange Peel Based Activated Carbons as Cathodes in Lithium Ion CapacitorsSynthesis of Fe2O3/C Nanocomposite Using Microwave Assisted Calcination MethodMagnetic CuFe2O4 Nanoparticles for Adsorpstion of Cr(VI) from Aqueous SolutionOptical Properties of Zn-Doped CeO2 Nanoparticles as a Function of Zn ContentChelating Agent Role in Synthesizing Cerate-Zirconate Powder by a Sol-Gel MethodInfluence of Ionic Surfactants under Ultrasonic Irradiation to Reduce the Particle Size of Mechanically Alloyed La1-XSrX Fe0.5Mn0.25Ti0.25O3 PowdersCovalent Functionalization of Amino Group onto Carbon-Based Magnetic Nanoparticles Using Pulsed-Powder Explosion TechniqueMagnetic Properties and Microstructures of Polyethylene Glycol (PEG)-Coated Cobalt Ferrite (CoFe2O4) Nanoparticles Synthesized by Coprecipitation MethodCopper-Zinc-Titania Nanocomposite as Catalyst for CO2 Photo-Reduction: A Surface Deactivation StudyThe Highly Active Photocatalyst of Silver Orthophosphate under Visible Light Irradiation for Phenol OxidationTreatment of Coal Stockpile Wastewater by Electrocoagulationusing Aluminum ElectrodesPreparation of Activated Carbons from Coconuts Shell for Pb (II) AdsorptionPreparation of Sulfated Zirconia Using Modified Sol Gel MethodEnrichment of Indonesian Low Rank Coal's Surface Oxygen Compounds (SOCs) Using Hydrogen Peroxide and its Adsorptive PropertiesCharacteristics of Water-ZrO2 Nanofluids with Different pH Utilizing Local ZrO2 Nanoparticle Prepared by Precipitation MethodCorrosion of Carbon Steel in Nanofluid Containing ZrO2 Nanoparticle at Different TemperatureContact Formation at Interface of LSCO BCZY LSCO Symmetrical Cell: Effect of LSCO to PVP RatioPreparation of Activated Carbon Monolith Electrodes from Sugarcane Bagasse by Physical and Physical-Chemical Activation Process for Supercapacitor ApplicationThe Effect of Paste Preparation and Annealing Temperature of ZnO Photoelectrode to Dye-Sensitized Solar Cells (DSSC) PerformanceUtilization of Natural Porphyrin Thin Films as a Photosensitizer for PhotodetectorsEffect of Growth Temperature on Cobalt-Doped TiO2 Thin Films Deposited on Si (100) Substrate by MOCVD TechniqueFabrication of Aluminum Doped Silica Preform Using MCVD and Solution Doping Technique: Soot Analyses and Solution Concentration EffectThe Influence of Mn/Ga Solution Mole Fraction on the Solid Composition and Microstructure of GaN:Mn Thin Film Deposited on Silicon Substrate by Spin Coating TechniqueGrain Size Analysis on Ba0.65Sr0.35TiO3 Thin Films Using Design of ExperimentFabrication and Characterization of Stacked Self-Assembled In0.5Ga0.5As/GaAs Quantum Dots Grown by MOCVDEr2O3-Al2O3 Doped Silica Preform Prepared by MCVD-Chelate Vapor Phase Delivery TechniqueThe Effect of Variation Concentration Nd3+ Ions on Physical and Optical Properties of TZBN GlassEffects of Iron Dopants on Barium Strotium Titanate (Ba0.8Sr0.2TiO3) Thin FilmsWettability Study Using O2 and Ar RIE Gas Treatment on Aluminium SurfaceRoom-Temperature Deposition of ZnO Thin Films by Using DC Magnetron SputteringDefects Induced by Reactive Ion Etching in Ge SubstrateEffect of Electrolyte Composition on Corrosion Resistance in Nickel Plating Process for Coating Bonded Magnet PrFeBEffects of Sputtering Coating Factors on Elastic Modulus of MoN CoatingsEffect of Anodizing in Surface Finishing on Speed Boat Impeller Made of AluminumBiomimetic Creation of Surfaces on Porous Titanium for Biomedical ApplicationsProduction and Characterization of Biodegradable Plastics Based on Starch of Artocarpus heterophyllus Lam SeedsCharacteristics of Mg-Ca-Zn Alloy Metallic Foam Based on Mg-Zn-CaH2 SystemThe Effect of Repeated Impingement on UHMWPE Material in Artificial Hip Joint during Salat ActivitiesSimple and Easy Method to Synthesize Chicken Eggshell Based HydroxyapatiteSynthesis of Chitosan-Gold Nanoparticles for Drug DeliverySynthesis of Hydroxyapatite Nanoparticle from Tutut (Bellamya javanica) Shells by Using Precipitation Method for Artificial Bone EngineeringAdsorption of Lead Ions onto Citric Acid Modified Rubber (Hevea brasiliansis) LeavesEffect of Deacetylation on Characterization of pH Stimulus Responsive Chitosan-Acrylamide Hydrogels Using RadiationSynthesis of Smart Biodegradable Hydrogels Cellulose-Acrylamide Using Radiation as Controlled Release FertilizersStructural Studies of 1,3:2,4-Dibenzylidene Sorbitol GelsEffects of Surface Treatments on Nata de Cassava on the Tensile Strength and Morphology of Bacterial Cellulose SheetImpact and Thermal Properties of Unsaturated Polyester (UPR) Composites Filled with Empty Fruit Bunch Palm Oil (EFBPO) and CelluloseBiodegradation of Low Density Polyethylene (LDPE) Composite Filled with Cellulose and Cellulose AcetateThe Treated Rice Straw as Potentially Feedstock of Wood and Rice Straw Fiber Blend for Pulp and Paper Making IndustryExperimental Studies of Thermo-Induced Mechanical Effects in the Main-Chain Liquid Crystal ElastomersCharacterization of Photo Biocomposites for Application in Biomedical MaterialsStudy on Ginger Extract Performance as Corrosion Inhibitor in Acid and Neutral EnvironmentsComparison between Slip Casting and Cold Isostatic Pressing for the Fabrication of Nanostructured ZirconiaFabrication of Silver Nanoparticles and its Films and their Characterization of Structure and Electrical ConductivityCrystallographic and Electrical Properties of Barium Zirconium Titanate Doped by Indium and LanthanumOhmic Contact in P-HEMT Wafer Using Metallization with Ge/Au/Ni/AuPossible Existence of the Stripe Correlations in Electron-Doped Superconducting Cuprates Eu1.85Ce0.15Cu1-yNiyO4+a-d Studied by Muon-Spin-RelaxationFabrication and Characterization of Ferroelectric Thin Film BaxSr1-xTiO3 for Application in Light Intensity DetectorA Theoretical Study on Electron Tunneling Current in Isotropic High-? Dielectric Stack-Based MOS Capacitors with Charge TrappingModeling of Drain Current in Armchair Graphene Nanoribbon Field Effect Transistor Using Transfer Matrix MethodA Theoretical Model of Band-to-Band Tunneling Current in an Armchair Graphene Nanoribbon Tunnel Field-Effect TransistorDetermination of Thin Film Ba0.5Sr0.5TiO3 Ferroelectric Effective Mass from I-V Characteristics Calculation Using Transfer Matrix MethodThermal Analysis and Magnetic Properties of Lanthanum Barium Manganite PerovskiteMagnetoelectric Coupling Phenomena Based on the Changes of Magnetic Properties in Multiferroic Nanocomposite BaTiO3-BaFe12O19Microstructural Studies of (Ba0.7Sr0.3Fe12O19)1-x - (Ba0.7Sr0.3TiO3)x with x = 0.2, x = 0.5 and x = 0.8 Composite System by Mechanical Alloying ProcessModeling of Magnetorheological Damper Using Back Propagation Neural NetworkMicrostructural and Magnetic Properties of Ti2+-Mn4+ Substituted Barium HexaferriteThe Influence of Ni-Doping on Structure and Magnetic Properties of La0.67Ba0.33MnO3Micromagnetic Study on the Dynamic Susceptibility Spectra of Square-Patterned FerromagnetsMicromagnetic Simulation on Ground State Domain Structures of Barium Hexaferrite (BaFe12O19)Magnetic Properties and Reflection Loss Characteristic of Mn-Ti Substituted Barium-Strontium HexaferriteAnalysis of Structural and Microstructure of Lanthanum Ferrite by Modifying Iron Sand for Microwave Absorber Material ApplicationCharacterization of Single Phase of La0.8Ba0.2Fe0.3Mn0.35Ti0.35O3 Nanoparticles as Microwave AbsorbersMagnetic Properties of Coring Samples from Aceh Basin West Off Sumatera IslandMicrowave Properties of Composite Ba0.5Sr0.5Fe11.7Mn0.15Ti0.15O19/La0.7Ba0.3MnO3 MaterialExperiment Using a Magnetically Controlled Ferrofluid Flow in a Flatplate Laminar Flow SystemAnode Buffer for Organic Devices Composed of Gold Nanoparticles Prepared by Ark Plasma DepositionA Simple Optimization of Triple-Junction Solar Cell nc-Si:H/a-Si:H/a-SiGe:H Using Computer Modeling and Robust DesignDetailed Analysis of Shallow and Heavily-Doped Emitters for Al-BSF Bifacial Solar CellsMicrowave-Assisted Solid State Synthesis of Red-Emitting BCNO Phosphor and its CharacteristicsSynthesized 2,4,5-Triphenylimidazole as Precursor of Organic Light Emitting Diode (OLED) MaterialPrelimenary Study on the Photovoltaic and Impedance Characteristics of Dye Sensitized Solar Cell (DSSC) using Polymer Gel ElectrolyteCharge Carrier Dynamics of Active Material Solar Cell P3HT:ZnO Nanoparticles Studied by Muon Spin Relaxation (?SR)Influence of Mass Ratio of Aquadest and TTIP on the Synthesis of TiO2 Nanoparticles to Improve the Performance of DSSC with Beta-Carotene as SensitizerSol-Gel Derived ZnO Nanorod Templated TiO2 Nanotube Synthesis for Natural Dye Sensitized Solar CellOrganic-Inorganic Solar Cell Based on Sprayed MEH-PPV/ZnO Nanorods LayersDimensional Analysis of Grid Pattern on a Nematic Liquid CrystalStructural, Chemical Composition and Optical Properties of CdTe Fabricated by Vacuum Evaporation TechniqueThe Formulation of Phonon as the Result of Second Quantization of Crystalline Lattice Vibration Using Wave Functional MethodSynthesis of Tungsten Oxide (WO3) Film on Glass Substrate Using Aqueous Based Solution Spray Deposition MethodEffect of Oxygen Plasma on the Optical Properties of Monolayer GrapheneThe Influence of Sandblasting and Electropolishing on the Surface Hardness of AISI 316L Stainless SteelGround Shear Strain and Rate of Erosion in the Coastal Area of North Bengkulu, IndonesiaPreparation and Characterization of Magnetite-Silica Nano-Composite as Adsorbents for Removal of Methylene Blue Dyes from Environmental Water SamplesDevelopment of Hydrocracking Catalyst Support from Kaolin of Indonesian OriginAdsorption Mechanism of Carbon Monoxide on PtRu and PtRuMo Surfaces in the Density Functional Theory PerspectiveZnO-SiO2/Laponite Photocatalyst: Kinetic Study on Photocatalytic Decolorization of Methylene BlueHydrothermal Synthesis and Visible-Light-Driven Photocatalytic Activity of Allophane ? Wakefieldite-(Ce) CompositeStudy of Internal Response of Epoxy due to Compressive Load via Experiment and Simulation Using Abaqus FEA SoftwareDevelopment of Geopolymer Utilizing Inorganic Waste MaterialsHigh Compressive Strength of Palm Oil Empty Fruit Bunches (Elaeis guineensis) CompositesImproving the Physico-Mechanical Properties of Eco-Friendly Composite Made from BambooProperties of the Treated Kenaf/Polypropylene (PP) CompositesImproving Mechanical Properties of Ceramic Composites by Harmonic Microstructure ControlApplication of Carbon Fiber-Based Composite for Electric VehicleCoating Steel with Nanosilica by Pulsed Direct Current Electrophoresis for Corrosion Protection
In Situ Al/Al2O3 Composite Coating on Steel Substrate Prepared by Mechanical Alloying at High TemperatureNano-Micro Characterization of NiCoCrAl Coating on Carbon Steel SubstrateInfluence of Sintering Temperature on the Translucency of Sintered Zirconia by Cold Isostatic PressingThe Phenomenon of Pitting Corrosion Attack on the Milled Aluminium Alloy Al 2618 Plate during Surface Preparation through Sulphuric Acid AnodisingStudy of Laser Cladding of Stellite 6 on Nickel Superalloy Substrate with Two Different Energy InputsInterdiffusion of Elements in Aluminum 2024 Clad during Reheat Treatment Process at 495?CBoron Carbide B25C and B8C18 Synthesized Using Boric Acid-Glucose and Boric Acid-Active Carbon at Low Temperature without Coreductor MaterialsInfluence of Oxygen on Microstructures of Ti-Mo-Cr AlloyEffect of Copper Addition on the High Temperature Oxidation of Zirconium Alloy ZrNbMoGe for Advanced Reactor Fuel Cladding MaterialFractographic Analysis of 5052 Al-Mg Alloys Processed by Equal Channel Angular PressingFatigue and Mechanical Properties of Aluminium-Copper Bi-Metal TubesDetermination of Band Gap Energy of Semiconductor in Homojunction Structure Devices by Using Customized Microcontroller Based ApparatusMacrotexture Study of Non- and Sintered Pure Nb and Nb3Sn Using Orientation Distribution FunctionModeling of Repeated Rolling Contact on Rough Surface: Surface Topographical ChangeNeutron Diffraction Measurements on Dissimilar Metal Weld of Cu-Al Obtained by Friction Stir Welding MethodTesting of Materials for Heat and Moisture TransportSimultaneous Calibration for MEMS Gyroscopes of the Rocket IMUQuantitative Bump Height Analysis in ENIG Using Design of ExperimentAutomation of Four Circle Diffractomete /Texture Diffractometer for Studies of Crystal Structure and Texture MeasurementsCelluloide Film Based Infrared Bandpass Filter for ThermographyComparison between Automatic and Semiautomatic Thresholding Method for Mammographic Density ClassificationImage Processing for Multiple Micro-Radiography Images3D Micro-Radiography Imaging for Quick Assessment on Small SpecimenEffect of EDTA and PYP as Co-Ligand of Radiolabeled Nanomaterial M41S-NH2 for RadiosynovectomyWeld Defect Classification in Radiographic Film Using Statistical Texture and Support Vector MachineInvestigation of Moisture in Coal Using Electrical Capacitance Volume TomographyDesign and Fabrication of Wear Testing Machine for a Fishing Net-Weaving Machine ComponentHigh Performance Current-Voltage Characterization System for High Resistance MaterialsOnline Monitoring of Copper Leaching Process Heterogeneity Using Electrical Capacitance Volume TomographyHigh Sensitivity Fluxgate Sensor for Detection of AC Magnetic Field: Equipment for Characterization of Magnetic Material in SubsurfaceFlaw Detection in Welded Metal Using Magnetic Induction TomographyA New Type of Planar Chamber for High Frequency Ozone Generator System
