Buch, Englisch, 762 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1400 g
Buch, Englisch, 762 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1400 g
ISBN: 978-3-03835-031-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organizers
Chapter 1: Nanofibers and Membranes
The Role and Prospect of Nanomaterials in Polymeric Membrane for Water and Wastewater Treatment: A State-of-the-Art Overview
Synthesis of Low Fouling Porous Polymeric Membranes
Mass Production of Stacked Styrofoam Nanofibers Using a Multinozzle and Drum Collector Electrospinning System
Transparent and Conductive Fluorinated-Tin Oxide Prepared by Atmospheric Deposition Technique
Gas Sensing Using Static and Dynamic Modes Piezoresistive Microcantilever
One-Step Fabrication of Short Nanofibers by Electrospinning: Effect of Needle Size on Nanofiber Length
Carbon Dioxide Permeation Characteristics in Asymmetric Polysulfone Hollow Fiber Membrane: Effect of Constant Heating and Progressive Heating
Electrospinning of Poly(vinyl alcohol)/Chitosan via Multi-Nozzle Spinneret and Drum Collector
A Simple Way of Producing Nano Anatase TiO2 in Polyvinyl Alcohol Fibers
The Crystal Structure, Conductivity Character and Ionic Migration of Samarium Doped-Ceria (SDC) and its Composite with Sodium Carbonate
Preparation of Sulfonate Grafted Silica/Chitosan-Based Proton Exchange Membrane
Synthesis and Characterization of Solid Polymer Electrolyte from N-Succinyl Chitosan and Lithium Perchlorate
Epoxidised Natural Rubber Based Polymer Electrolyte Systems for Electrochemical Device Applications
Eggs Shell Membrane as Natural Separator for Supercapacitor Applications
Titania Coated Ceramic Membrane from Clay and Muntilan Sand for Wastewater Filter Application
Utilization of Fly Ash as Ceramic Support Mixture for the Synthesis of Zeolite Pervaporation Membrane
Synthesis and Characterization of Nanostructured Tungsten Oxide by Hard Template Method
Chapter 2: Nanoparticles and Powders
Excited-State Proton Transfer in Fluorescent Photoactive Yellow Protein Containing 7-Hydroxycoumarin
Effect of Heating Time on Atrazine-Based MIP Materials Synthesized via the Cooling-Heating Method
Preparation of Orange Peel Based Activated Carbons as Cathodes in Lithium Ion Capacitors
Synthesis of Fe2O3/C Nanocomposite Using Microwave Assisted Calcination Method
Magnetic CuFe2O4 Nanoparticles for Adsorpstion of Cr(VI) from Aqueous Solution
Optical Properties of Zn-Doped CeO2 Nanoparticles as a Function of Zn Content
Chelating Agent Role in Synthesizing Cerate-Zirconate Powder by a Sol-Gel Method
Influence of Ionic Surfactants under Ultrasonic Irradiation to Reduce the Particle Size of Mechanically Alloyed La1-XSrX Fe0.5Mn0.25Ti0.25O3 Powders
Covalent Functionalization of Amino Group onto Carbon-Based Magnetic Nanoparticles Using Pulsed-Powder Explosion Technique
Magnetic Properties and Microstructures of Polyethylene Glycol (PEG)-Coated Cobalt Ferrite (CoFe2O4) Nanoparticles Synthesized by Coprecipitation Method
Copper-Zinc-Titania Nanocomposite as Catalyst for CO2 Photo-Reduction: A Surface Deactivation Study
The Highly Active Photocatalyst of Silver Orthophosphate under Visible Light Irradiation for Phenol Oxidation
Treatment of Coal Stockpile Wastewater by Electrocoagulationusing Aluminum Electrodes
Preparation of Activated Carbons from Coconuts Shell for Pb (II) Adsorption
Preparation of Sulfated Zirconia Using Modified Sol Gel Method
Enrichment of Indonesian Low Rank Coal's Surface Oxygen Compounds (SOCs) Using Hydrogen Peroxide and its Adsorptive Properties
Characteristics of Water-ZrO2 Nanofluids with Different pH Utilizing Local ZrO2 Nanoparticle Prepared by Precipitation Method
Corrosion of Carbon Steel in Nanofluid Containing ZrO2 Nanoparticle at Different Temperature
Chapter 3: Thick and Thin Films
Contact Formation at Interface of LSCO BCZY LSCO Symmetrical Cell: Effect of LSCO to PVP Ratio
Preparation of Activated Carbon Monolith Electrodes from Sugarcane Bagasse by Physical and Physical-Chemical Activation Process for Supercapacitor Application
The Effect of Paste Preparation and Annealing Temperature of ZnO Photoelectrode to Dye-Sensitized Solar Cells (DSSC) Performance
Utilization of Natural Porphyrin Thin Films as a Photosensitizer for Photodetectors
Effect of Growth Temperature on Cobalt-Doped TiO2 Thin Films Deposited on Si (100) Substrate by MOCVD Technique
Fabrication of Aluminum Doped Silica Preform Using MCVD and Solution Doping Technique: Soot Analyses and Solution Concentration Effect
The Influence of Mn/Ga Solution Mole Fraction on the Solid Composition and Microstructure of GaN:Mn Thin Film Deposited on Silicon Substrate by Spin Coating Technique
Grain Size Analysis on Ba0.65Sr0.35TiO3 Thin Films Using Design of Experiment
Fabrication and Characterization of Stacked Self-Assembled In0.5Ga0.5As/GaAs Quantum Dots Grown by MOCVD
Er2O3-Al2O3 Doped Silica Preform Prepared by MCVD-Chelate Vapor Phase Delivery Technique
The Effect of Variation Concentration Nd3+ Ions on Physical and Optical Properties of TZBN Glass
Effects of Iron Dopants on Barium Strotium Titanate (Ba0.8Sr0.2TiO3) Thin Films
Wettability Study Using O2 and Ar RIE Gas Treatment on Aluminium Surface
Room-Temperature Deposition of ZnO Thin Films by Using DC Magnetron Sputtering
Defects Induced by Reactive Ion Etching in Ge Substrate
Effect of Electrolyte Composition on Corrosion Resistance in Nickel Plating Process for Coating Bonded Magnet PrFeB
Effects of Sputtering Coating Factors on Elastic Modulus of MoN Coatings
Effect of Anodizing in Surface Finishing on Speed Boat Impeller Made of Aluminum
Chapter 4: Biomaterials
Biomimetic Creation of Surfaces on Porous Titanium for Biomedical Applications
Production and Characterization of Biodegradable Plastics Based on Starch of Artocarpus heterophyllus Lam Seeds
Characteristics of Mg-Ca-Zn Alloy Metallic Foam Based on Mg-Zn-CaH2 System
The Effect of Repeated Impingement on UHMWPE Material in Artificial Hip Joint during Salat Activities
Simple and Easy Method to Synthesize Chicken Eggshell Based Hydroxyapatite
Synthesis of Chitosan-Gold Nanoparticles for Drug Delivery
Synthesis of Hydroxyapatite Nanoparticle from Tutut (Bellamya javanica) Shells by Using Precipitation Method for Artificial Bone Engineering
Adsorption of Lead Ions onto Citric Acid Modified Rubber (Hevea brasiliansis) Leaves
Effect of Deacetylation on Characterization of pH Stimulus Responsive Chitosan-Acrylamide Hydrogels Using Radiation
Synthesis of Smart Biodegradable Hydrogels Cellulose-Acrylamide Using Radiation as Controlled Release Fertilizers
Structural Studies of 1,3:2,4-Dibenzylidene Sorbitol Gels
Effects of Surface Treatments on Nata de Cassava on the Tensile Strength and Morphology of Bacterial Cellulose Sheet
Impact and Thermal Properties of Unsaturated Polyester (UPR) Composites Filled with Empty Fruit Bunch Palm Oil (EFBPO) and Cellulose
Biodegradation of Low Density Polyethylene (LDPE) Composite Filled with Cellulose and Cellulose Acetate
The Treated Rice Straw as Potentially Feedstock of Wood and Rice Straw Fiber Blend for Pulp and Paper Making Industry
Experimental Studies of Thermo-Induced Mechanical Effects in the Main-Chain Liquid Crystal Elastomers
Characterization of Photo Biocomposites for Application in Biomedical Materials
Study on Ginger Extract Performance as Corrosion Inhibitor in Acid and Neutral Environments
Comparison between Slip Casting and Cold Isostatic Pressing for the Fabrication of Nanostructured Zirconia
Chapter 5: Electronic Materials
Fabrication of Silver Nanoparticles and its Films and their Characterization of Structure and Electrical Conductivity
Crystallographic and Electrical Properties of Barium Zirconium Titanate Doped by Indium and Lanthanum
Ohmic Contact in P-HEMT Wafer Using Metallization with Ge/Au/Ni/Au
Possible Existence of the Stripe Correlations in Electron-Doped Superconducting Cuprates Eu1.85Ce0.15Cu1-yNiyO4+a-d Studied by Muon-Spin-Relaxation
Fabrication and Characterization of Ferroelectric Thin Film BaxSr1-xTiO3 for Application in Light Intensity Detector
A Theoretical Study on Electron Tunneling Current in Isotropic High- Dielectric Stack-Based MOS Capacitors with Charge Trapping
Modeling of Drain Current in Armchair Graphene Nanoribbon Field Effect Transistor Using Transfer Matrix Method
A Theoretical Model of Band-to-Band Tunneling Current in an Armchair Graphene Nanoribbon Tunnel Field-Effect Transistor
Determination of Thin Film Ba0.5Sr0.5TiO3 Ferroelectric Effective Mass from I-V Characteristics Calculation Using Transfer Matrix Method
Chapter 6: Magnetic Materials
Thermal Analysis and Magnetic Properties of Lanthanum Barium Manganite Perovskite
Magnetoelectric Coupling Phenomena Based on the Changes of Magnetic Properties in Multiferroic Nanocomposite BaTiO3-BaFe12O19
Microstructural Studies of (Ba0.7Sr0.3Fe12O19)1-x - (Ba0.7Sr0.3TiO3)x with x = 0.2, x = 0.5 and x = 0.8 Composite System by Mechanical Alloying Process
Modeling of Magnetorheological Damper Using Back Propagation Neural Network
Microstructural and Magnetic Properties of Ti2+-Mn4+ Substituted Barium Hexaferrite
The Influence of Ni-Doping on Structure and Magnetic Properties of La0.67Ba0.33MnO3
Micromagnetic Study on the Dynamic Susceptibility Spectra of Square-Patterned Ferromagnets
Micromagnetic Simulation on Ground State Domain Structures of Barium Hexaferrite (BaFe12O19)
Magnetic Properties and Reflection Loss Characteristic of Mn-Ti Substituted Barium-Strontium Hexaferrite
Analysis of Structural and Microstructure of Lanthanum Ferrite by Modifying Iron Sand for Microwave Absorber Material Application
Characterization of Single Phase of La0.8Ba0.2Fe0.3Mn0.35Ti0.35O3 Nanoparticles as Microwave Absorbers
Magnetic Properties of Coring Samples from Aceh Basin West Off Sumatera Island
Microwave Properties of Composite Ba0.5Sr0.5Fe11.7Mn0.15Ti0.15O19/La0.7Ba0.3MnO3 Material
Experiment Using a Magnetically Controlled Ferrofluid Flow in a Flatplate Laminar Flow System
Chapter 7: Optical Materials
Anode Buffer for Organic Devices Composed of Gold Nanoparticles Prepared by Ark Plasma Deposition
A Simple Optimization of Triple-Junction Solar Cell nc-Si:H/a-Si:H/a-SiGe:H Using Computer Modeling and Robust Design
Detailed Analysis of Shallow and Heavily-Doped Emitters for Al-BSF Bifacial Solar Cells
Microwave-Assisted Solid State Synthesis of Red-Emitting BCNO Phosphor and its Characteristics
Synthesized 2,4,5-Triphenylimidazole as Precursor of Organic Light Emitting Diode (OLED) Material
Prelimenary Study on the Photovoltaic and Impedance Characteristics of Dye Sensitized Solar Cell (DSSC) using Polymer Gel Electrolyte
Charge Carrier Dynamics of Active Material Solar Cell P3HT:ZnO Nanoparticles Studied by Muon Spin Relaxation (µSR)
Influence of Mass Ratio of Aquadest and TTIP on the Synthesis of TiO2 Nanoparticles to Improve the Performance of DSSC with Beta-Carotene as Sensitizer
Sol-Gel Derived ZnO Nanorod Templated TiO2 Nanotube Synthesis for Natural Dye Sensitized Solar Cell
Organic-Inorganic Solar Cell Based on Sprayed MEH-PPV/ZnO Nanorods Layers
Dimensional Analysis of Grid Pattern on a Nematic Liquid Crystal
Structural, Chemical Composition and Optical Properties of CdTe Fabricated by Vacuum Evaporation Technique
The Formulation of Phonon as the Result of Second Quantization of Crystalline Lattice Vibration Using Wave Functional Method
Synthesis of Tungsten Oxide (WO3) Film on Glass Substrate Using Aqueous Based Solution Spray Deposition Method
Effect of Oxygen Plasma on the Optical Properties of Monolayer Graphene
Chapter 8: Composites, Ceramics, and Alloys
The Influence of Sandblasting and Electropolishing on the Surface Hardness of AISI 316L Stainless Steel
Ground Shear Strain and Rate of Erosion in the Coastal Area of North Bengkulu, Indonesia
Preparation and Characterization of Magnetite-Silica Nano-Composite as Adsorbents for Removal of Methylene Blue Dyes from Environmental Water Samples
Development of Hydrocracking Catalyst Support from Kaolin of Indonesian Origin
Adsorption Mechanism of Carbon Monoxide on PtRu and PtRuMo Surfaces in the Density Functional Theory Perspective
ZnO-SiO2/Laponite Photocatalyst: Kinetic Study on Photocatalytic Decolorization of Methylene Blue
Hydrothermal Synthesis and Visible-Light-Driven Photocatalytic Activity of Allophane – Wakefieldite-(Ce) Composite
Study of Internal Response of Epoxy due to Compressive Load via Experiment and Simulation Using Abaqus FEA Software
Development of Geopolymer Utilizing Inorganic Waste Materials
High Compressive Strength of Palm Oil Empty Fruit Bunches (Elaeis guineensis) Composites
Improving the Physico-Mechanical Properties of Eco-Friendly Composite Made from Bamboo
Properties of the Treated Kenaf/Polypropylene (PP) Composites
Improving Mechanical Properties of Ceramic Composites by Harmonic Microstructure Control
Application of Carbon Fiber-Based Composite for Electric Vehicle
Coating Steel with Nanosilica by Pulsed Direct Current Electrophoresis for Corrosion Protection
In Situ Al/Al2O3 Composite Coating on Steel Substrate Prepared by Mechanical Alloying at High Temperature
Nano-Micro Characterization of NiCoCrAl Coating on Carbon Steel Substrate
Influence of Sintering Temperature on the Translucency of Sintered Zirconia by Cold Isostatic Pressing
The Phenomenon of Pitting Corrosion Attack on the Milled Aluminium Alloy Al 2618 Plate during Surface Preparation through Sulphuric Acid Anodising
Study of Laser Cladding of Stellite 6 on Nickel Superalloy Substrate with Two Different Energy Inputs
Interdiffusion of Elements in Aluminum 2024 Clad during Reheat Treatment Process at 495°C
Boron Carbide B25C and B8C18 Synthesized Using Boric Acid-Glucose and Boric Acid-Active Carbon at Low Temperature without Coreductor Materials
Influence of Oxygen on Microstructures of Ti-Mo-Cr Alloy
Effect of Copper Addition on the High Temperature Oxidation of Zirconium Alloy ZrNbMoGe for Advanced Reactor Fuel Cladding Material
Fractographic Analysis of 5052 Al-Mg Alloys Processed by Equal Channel Angular Pressing
Fatigue and Mechanical Properties of Aluminium-Copper Bi-Metal Tubes
Chapter 9: Measurement and Characterization Techniques
Determination of Band Gap Energy of Semiconductor in Homojunction Structure Devices by Using Customized Microcontroller Based Apparatus
Macrotexture Study of Non- and Sintered Pure Nb and Nb3Sn Using Orientation Distribution Function
Modeling of Repeated Rolling Contact on Rough Surface: Surface Topographical Change
Neutron Diffraction Measurements on Dissimilar Metal Weld of Cu-Al Obtained by Friction Stir Welding Method
Testing of Materials for Heat and Moisture Transport
Simultaneous Calibration for MEMS Gyroscopes of the Rocket IMU
Quantitative Bump Height Analysis in ENIG Using Design of Experiment
Automation of Four Circle Diffractomete /Texture Diffractometer for Studies of Crystal Structure and Texture Measurements
Celluloide Film Based Infrared Bandpass Filter for Thermography
Comparison between Automatic and Semiautomatic Thresholding Method for Mammographic Density Classification
Image Processing for Multiple Micro-Radiography Images
3D Micro-Radiography Imaging for Quick Assessment on Small Specimen
Effect of EDTA and PYP as Co-Ligand of Radiolabeled Nanomaterial M41S-NH2 for Radiosynovectomy
Weld Defect Classification in Radiographic Film Using Statistical Texture and Support Vector Machine
Investigation of Moisture in Coal Using Electrical Capacitance Volume Tomography
Design and Fabrication of Wear Testing Machine for a Fishing Net-Weaving Machine Component
High Performance Current-Voltage Characterization System for High Resistance Materials
Online Monitoring of Copper Leaching Process Heterogeneity Using Electrical Capacitance Volume Tomography
High Sensitivity Fluxgate Sensor for Detection of AC Magnetic Field: Equipment for Characterization of Magnetic Material in Subsurface
Flaw Detection in Welded Metal Using Magnetic Induction Tomography
A New Type of Planar Chamber for High Frequency Ozone Generator System
