Buch, Englisch, 945 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1800 g
ISBN: 978-3-03785-233-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface und Committees
Development of Helicopter Power Transmission System Technology
Future Transmissions for Wind Turbines
Dynamic Behavior of Helical Gears with Effects of Shaft and Bearing Flexibilities
Dynamic Modeling of Multi-Stage Planetary Gears Coupled with Bearings in Housing
A Static and Dynamic Model of Spiral Bevel Gears
Research on Meshing Characteristics for Face Gear with Arcuate Tooth
A Challenge to Design of a New Harmonic Drive Device
Study on Helical Tooth Profile Modification of Planetary Gear Transmission on the Basis of Gear Transmission Error
Optimization Procedure for Complete Planetary Gearboxes with Torque, Weight, Costs and Dimensional Restrictions
Analysis System of Marine Planetary Gear Trains
Application Probing of Advanced Helicopter Transmission System Technology
Initial Pressure Influence on Pressure Flow Factor Used in Mixed-Lubrication Model
Asymmetric Gears: Parameter Selection Approach
Failures in the Development and Service of the Helicopter Transmission System
Modification Analysis of the New Axis-Fixed Cycloid Drive
Research on the Dynamic Response of a Combining Gear Drive System
Study on General Principle for Structure Fatigue Substantiation of Helicopter Transmission Systems
Thermal Effects Analysis on DCT Driven Plate in Vehicle Initial Condition
Simulation of Finite Element Analysis for Cutting Force of High-Speed Dry Gear Milling by Flying Cutter
Optimum Design of the 3Z-II Planet Drive Based on Matlab
The Influence Analysis of Fatigue Limit for Mechanical Components Based on Standard Deviation of Full Scale Sub-Sample
X – Zero Gear Drive with Minor Teeth Difference
Study on the Dynamic Excitation of the Star Gearing
The Design Concept Application on RMS for Tail Drive System of Civil Helicopter
Dynamic Modeling and Virtual Test of a New All Terrain Off-Road Vehicle
Loaded Gear Contact Analyses for Pin Gear Reducers
Primary Application of the ILS Technology in the Tail Rotor Drive System of the Certain-Type Helicopter
Study on Design and Simulation of the Vibration-Reduction of the Damp Structure for the Gearbox
The Application of the Diagnoses Technique of Vibration on the Failure Analysis of Gear and Bearing in Gearbox
Advanced Tooth Surface Modification for Spiral Bevel Gears
Mold Machining Process and Applying Technologies of Spiral Bevel Gears
Lubrication Mode and Selection of the Helicopter Transmission System Roller Bearing
Analysis of Static Load Sharing in Star Gearing
Active Gear Pair Vibration Control Based on Filtered-X RLS Algorithm
Preload Design of Bearings in Helicopter Transmission System
Dynamics Study of a Dynamic Balancing Linkage with Small Fluctuations in Load
Blind Separation Method for Gearbox Mixed Fault Signals
Analysis on Thermo-Mechanical Coupling Contact Stress of Cycloid Ball Planetary Drive
Computational Tooth Root Stress Analysis of Crossed Beveloid Gears with Small Shaft Angle
Research on Relationship between Modulus and Tooth Number of Transmitting Gear and Vibration Noise
Load-Excursion Failure Analysis of the Gearbox’s Input Pinion
Optimal Design of Passive Magnetic Damper for Rotor Based on Sequential Quadratic Programming Method
Failure Analysis of Transmission Gear for Heavy Vehicles
Influence of Flyweight Profile on Regulating Characteristic of Rubber V-Belt CVT
A Study on Spiral Bevel Gear Fault Detection Using Artificial Neural Networks and Wavelet Transform
Virtual Modeling and Finite Element Analysis of Flexspline Based on Solidworks
Research on Magnetic Transmission Design
Study on Strength Calculation and Bend Stress Test of Face Gear
The Longitudinal Vibration Analysis of the Drive Screw Under the Elastic Supports
New Calculation Method for the Load Capacity of Bevel And Hypoid Gears Based on Loaded Tooth Contact Analysis
Research on the Load Sharing Technique and Experimental Validation of NGW Type Planetary Gear Train
Dynamics Analysis of A Planetary Mechanism Soft Starter
Dynamic Properties Analysis of Compliant Foil Aerodynamic Bearings Based on Spring Model
Dynamic Analysis of Combined Gear Drive
Improve the Wear Resistant Life of the Sprag Clutch by Used the Chemical Vapor Deposition Technology
Dynamic Analysis and Multi-Object Optimization of the Forced Torsional Vibration for Vehicular Multi-Stage Planetary Gears
The Design and FEM Analysis of End-Face Tooth of Coupling Flange
Study on UV-LIGA Technology Fabrication of Micro Gear Transmission Device
Quantitative Analysis of the Influence of Installation Errors on the Contact Pattern of Spiral Bevel Gears
The Application and Development of the High Speed Overrunning Clutch in the Transmission System of the Helicopter
Single Versus Bi-Directional (Reversal) Gear Tooth Bending Stress and Life (S-N) Evaluation
Transmission Design for a Wind Powered Compressed Air Generation System
The Design and Experiment of Oval Bevel Gear
Research on Helicopter Main Gearbox Operating without Oil
Analysis of Load Sharing Behavior in Herringbone Gears Power Branching Transmission System
Improving Gearbox Design and Analysis for Offshore Wind Turbines
Investigation on Modulation Sidebands in a K-H-V Planetary Gear with Double-Enveloping Cycloid Drive Vibration
The Application and Investigation about Industry CT Scan Technology in the Measure and Design about Complex Box
Time Domain Computational Analysis for Shock Characteristics of Elastic Support Gearbox
Effect of Tooth Surface Modification on the Load Sharing and Strength of Offset Face Gear Drive with Spur Involute Pinion
Longitudinal Dynamic Modeling of the Snowmobile Considering Fuel Economy
Study on the Calculating Method of Bending Stress for Non-Circular Gear
Development Solution of Civil Helicopter Transmission Train Vibration Monitoring System
The Effect of Superfinishing on the Contact Fatigue of Case Carburised Gears
Numerical Method of Determining the Curvature Interference Limit Curve for Modified Hourglass Worm Pairs
Design, Analysis and Testing of a Mirco/Nano-Transmission Platform
Optimal Design and Contact Analysis for Planetary Roller Screw
The Application of Advanced Composite Material in Tail Driver Shaft of the Helicopter
Research on Digital Design and Manufacture Technology of Rolling Swing Movable Teeth Transmission
A Lumped Parameter Model to Analyse the Dynamic Load Sharing in Planetary Gears with Planet Errors
Sensitivity Analysis of Natural Frequency to Structural Parameters of Helical Gear Shaft for Wind Turbine Gearbox
Static/Dynamic Contact Finite Element Analysis for Tooth Profile Modification of Helical Gears
Helicopter Transmission System Technology Readiness Assessment
Current Development Situation and Prospect of Circular-Arc Gear
A New Method of Constructing Tooth Surface for Logarithmic Spiral Bevel Gear
Generation and TCA of Straight Bevel Gear Drive with Modified Geometry
Effects of Technical Elements on Microstructure and Hardness of TiAlN/TiN Coatings
Computer Simulation Analysis of Bending Stress for Face Gear with a New Type Fillet Tooth Surface
Thermal Network Model for Temperature Prediction in Planetary Gear Trains
The Design of RODS Software on the Basis of Transmission Machinery Robust Optimal Designing System
Study on Ultrasonic Lapping System of Spiral Bevel Gear
Quantitative Evaluation of Aero Spiral Bevel Gear Meshing Quality
Effect of Transmission Error on the Fluctuating Tension Force for Dual-Coiler Machine
Advanced Developments in Computerized Design and Manufacturing of Spiral Bevel and Hypoid Gear Drives
Study on the Micro Thermal EHL Behavior of Wind Turbine Gearbox
Experiment Study of Heat Transfer in Aeroengine Bearing Chambers
The Tooth Form Deviation Correction of CNC Spiral Bevel Gears Grinding Machine
Analysis of Thermoelastic Instability on Multi-Disc Clutch
Study of the Brush Seal Design and Test Technology
Modeling and Simulation of Mechatronic System to Integrated Design of Supervision: Using a Bond Graph Approach
Design and Manufacture of Helical Planetary Gear Reducer with Small Module and Big Helical Angle
Study on Designing and Dressing of Worm for Grinding Process of Face Gear
Bifurcation Analysis of Impact Model in Gear Transmission System
Operational Modal Test for Wind Turbine Gearbox
Transmission System Health Management Technique
Strength Analysis of Logix Gear Based on UG
Globoidal Indexing Cam’s CAD/CAM Development on Pro/E
Anonymous Function Method and its Application in Screw Pump’s Design and Processing
Rotor Dynamic Design of a Helicopter Tail Drive Shaft System
A Model of Nonlinear Dynamic Modeling for Planetary Gear Transmission System with Backlash
Dynamic Simulation Analysis of the Globoidal Indexing Cam Mechanism
Effects of Gear Manufacturing Error on the Dynamic Characteristics of Planetary Gear Transmission System of Wind Turbine
Effect of Shot Peened and Overload on Low Cycle Fatigue of Simulated Terminal Gear Specimen
Effects of Graphite Content on Performance of Powder Injection Molding Copper-Based Antifriction Materials
Dynamic Contact Emulate Analysis of Logarithmic Spiral Bevel Gear with ANSYS/LS-DYNA
Structure Design Research for Concrete Mixer Blade
Application of Contact Analysis in Strength Analysis of Helicopter Transmission System
Adaptive Impulse Controller Design of Harmonic Drives System with Friction
Research on Geometry Relationship of Pin-Rack Gearing
Coupled Motion Control and Adjustment in Automatic Programming System of CNC Hobbing Machines
Investigation and Application of the Helicopter Typical Flight States Identification
The Optimization Design for Rack Tooth Profile Curve of Straight Push-Rod Linear Reducer
Mechanisms of Synchronous Belt Tooth Failure due to Fatigue Shear Fracture
Precision Involute Gearboxes
Study on Face Gear's Bending Stress Based on Test and Finite Element Analysis Method
Powertrain Control Logic Test for Plug-in Hybrid Electric Vehicle
Effect of Atomic-Scale Roughness on Contact Behavior
The Technique of Centrifugal Load Loading on a Tail Rotor Shaft Fatigue Life Test
The Design of the Tooth Shape Silence Chain
Failure Analysis of Output Shaft in the Gearbox Transmission
Influence Factors and Calculating Methods for Gear Windage Power Loss
Optimum Design of a 3-RRR Planar Parallel Manipulator with a Singularity-Free Workspace
Study on Dynamic Load Sharing Behavior of Two-Stage Planetary Gear Train Based on a Nonlinear Vibration Model
Research on Milling-Turning Compound Processing of Spiral Bevel Gears Based on GibbsCAM
Design of Wind Turbine Gearbox Housing
Numerical Analysis on Transmission Characteristics of Stephenson’s Six-Bar Punching Mechanism with Servo Input
Research on the Knowledge Fusion Technology Based Optimized Design of the Drive Axle Differential Gear
Modular Design on Basic Parameters of Volume Reducer
An Accurate Modeling Method of the Plane Enveloping Hourglass Worm
Behavior Test on Wind Turbine Gearbox
Rolling Contact Fatigue Life of Case-Hardened Steel Treated by Shot Peenings with Shot Diameters of 0.05 mm and 0.30 mm
Multiscale Analysis on Friction-Reducing Characteristics of Textured Surface in Nanoscale Sliding Contacts
Study on Dynamic Characteristics of Wind Turbine Planetary Gear System Coupled with Bearing at Varying Wind Speed
Design and Analysis for High-Speed Gear Coupling
Dynamic Optimization Design of a Warship’s Gearbox Based on FEM
Optimum Design of Motion Curve of Cam Mechanism with Lowest Maximum Acceleration
Temperature Field and Residual Stress Analysis of the Gear on CO2 Laser Welding Process
Study of Load Distribution and Sharing Characteristics of Planetary Geartrain for Wind Turbines
Study on Loads of Accelerated Contact Fatigue Testing and its Application
The Optimization and Simulation of New Type Non-Circular Gears in CVT
Research of Simulation Technology in Low-Stress Machining on Tooth Surface of Spiral Bevel Gears Used in Aviation Industry
Effect of Machining Precision Caused by NC Gear Hobbing Deformation
Research on Lead Modification of Cylindrical Gears with Consideration of System Deformation
Modeling and Analysis of Gear Driving System Based on the CATIA
The Research on General Modeling Methods of the Complicated Transmission Based on Hypergraph Theory
A Simplified Approach Based Phase Angle for Tooth Contact Analysis of Planetary Gear Trains
Effect of Friction Coefficient on the Stiffness Excitation of Gear
Structural Design and Analysis of Thrust Collar in Main Wind Turbine Speed-Increasing Gearboxes
Study of Bearing Modelling in the Helicopter Gearbox
Static Load Sharing in Power-Split Planetary Gear Trains
Solid Modeling Methods and Wire-Cutting Process Simulation of Non-Circular Gears
Gearbox Fault Diagnosis Using Vibration Signal with Wavelet De-Noising
Dynamic Analysis and Experimental Study of MW Wind Turbine Gearbox
Determination of Load-Sharing Displacement of Flexible Pin Roll in Planet Gear Train
Research on Vibration Influence Chart of Planetary Gear Systems
Improvement of Positioning Error on a Ball Screw by Cooling System
A Discrete Lumped-Parameter Dynamic Model for a Planetary Gear Set with Flexible Ring Gear
Modeling and Controlling of Anti-Slip Regulation Based on Limited-Slip Differential
Advanced Methods of Gas Turbine Reducer Design and its Analyses
Deformation of Harmonic Drive in Transmission State Based on Contact Analysis with Shell Element Tooth
Research on Torsional Dynamic Model and Rigidity Excitation of Cycloid Ball Planetary Transmission System
Coordinated Torque Control for Mode-Switch between Motor and Engine Driving in Heavy Hybrid Electric Vehicle
Analysis of Winding Dynamics of Film Web on Winder
Life Estimation of Tilt-Rotor Transmission Based on Dynamic Analysis
Fluid Dynamic Analysis and Experimental Study on Wet Friction Clutch
Study on Visualization of Planetary Gear Based on Topological Theory
Strategy Study on Comfort Optimization of Metro Train Traction
Numerical Analysis of Concave-Slab Type Water Lubricated Rubber Alloy Bearings’ Lubrication
The Analysis of Gear Contact under Cyclical Load
Initial Behavior of Speed Increasing Helical Gears by Torque Fluctuation
Static Simulation Analysis of Torsion Characteristics of Highly Flexible Coupling
Using Lubricating Oil Filter Debris Analysis to Monitor Abnormal Wear of Aero-Engine
Research on Gear Contact Fatigue Stress Test
A Load Spectrum Method for Multi-Stage Planetary Transmission
The Design of Power Transmission of Electric Screw Press Directly Driven by Permanent Magnet Disc Synchronous Motor
Scanning Measurement and Evaluation of Gear Tooth Root and Bottom Profiles
A Method to Determine the Basic Value of Gear Root Stress Based on FEM
Development and Application of Non-Contact Seal Assembly for High-Speed Shaft Ends
Stress Analysis of the Skewed-Roller Slipping Clutch Based on Frictional Contact and Dynamic Equilibrium
Optimization of New Type Sintering Machine’s Sprocket Wheel with Even-Number Teeth
Optimum Design of Toggle Transmission System in Double Toggle Mechanical Press Using Response Surface Methodology Combined with Experimental Design
Original Research on Logarithmic Spiral Bevel Gear
Effects of Surface Roughness and Abnormal Surface Layer on Fatigue Strength
Precise Modeling of Arc Cylinder-Gears with Tooth Root Fillet
Study on 18Cr2Ni4WA Gear Contact Fatigue Experiment and Data Analysis
Thermal Analysis of Axial Driving System for Numerically Controlled Machine Tool
Reduction of Power Losses in Transmissions and Gearings
Manufacturing Method of Long-Cone-Distance Spiral Bevel Gears Based on CNC Machining Center
Analysis of Gas Dynamics in a Rotating Disk Cavity
Micropitting in Wind Turbine Gearboxes: Calculation of the Safety Factor and Optimization of the Gear Geometry
Modal Analysis and Parameters Research of Internal Helical Gears Based on AWE
Analysis on Deformation and Relieving of Spline in 1.5MW Wind Turbine Gearbox
