Advances in Engineering Plasticity and its Application XIII

Erscheinungsjahr 2017
ISBN: 978-3-0357-2024-2
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volume 725, 736 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Key Engineering Materials

The collection of scientific papers by results of 13-th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2016, December 4-8, 2016, Higashi-Hiroshima City, Japan) highlights basic moments of modern achievements in the field of study and of the practical use of the plastic properties and other mechanical properties of various structure materials for the purposes of modern mechanical engineering. We hope this collection will be useful for many scientists and engineers whose activities is related with modern engineering materials and their processing.

Autoren/Hrsg.

Yoshida, Fusahito

Hamasaki, Hiroshi

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Elastizität, Plastizität, Rheologie

Inhaltsverzeichnis

Advances in Constitutive Modeling of Plasticity for Forming ApplicationsModelling of Instability and Fracture Effects in the Sheet Metal Forming Based on an Extended X-FLC ConceptTowards a Better Understanding of the Ratcheting PhenomenonStrain Gradient Plasticity: An Application to Plastic Flow Localization AnalysisPlastic Limit Analysis of Piping with Local Wall-Thinning under Elevated TemperatureInvestigation on Micro-Tensile Test System Platform Used for Test of the WeldAn Experimental Evaluation of Energy Absorption of TRIP Steel by Small Punch TestA Computational Investigation on Small Punch Test for Evaluating Fracture Toughness of TRIP Steel at Higher Deformation RateA Measurement of Volume Resistivity in Fe-Based Shape Memory Alloy under Tensile Deformation and its Evaluation of Strain Rate SensitivityA Study on Tensile Deformation Behavior in Fe-Based Shape Memory Alloy by Rate Sensitive Transformation Kinetics ModelComparative Research on the Crushing Behaviour of Aluminium Sheet Wrapped Square Carbon Fibre Reinforced Plastic (CFRP) TubesFrangibility Study of Natural Fiber Reinforced Composite LaminatesCrashworthiness Study of Composite Fuselage SectionAn Experimental Study on Axial Joint Strength Made of Fe-28Mn-6Si-5Cr Shape Memory Alloy at Various Deformation SpeedsThe Saturated Impulse for Fully Clamped Square Plates Subjected to Linear-Decay Pressure PulseSeismic Performance of a Concrete Highway Tunnel under Earthquake Sequence Using a Concrete Damage Plasticity ModelProbing Temperature-Dependent Viscoelastic Properties of Glassy Materials Using Impact Induced Vibration - Theory and ExperimentsLow Velocity Impact Behavior of SiC/PU/GFRP LaminatesLow Velocity Impact Response of Composite/Sandwich StructuresRate-Dependent Material Parameters of the Combined Isotropic/Kinematic Hardening Model for the TRIP980 Steel SheetCharacterization of Hardening Behavior at Ultra-High Strain Rate, Large Strain, and High TemperatureLarge Deformation Modeling of a Re-Entrant Honeycomb under Tensile LoadLarge Deflection Response of Rectangular Metal Sandwich Plates with Functionally Graded Foam Core Subjected to Blast LoadingNumerical Study of the Effects of Strain Rate and Cell Geometry on Dynamic Behavior of Axial Crushing HoneycombA New Design of Energy Absorbing BoltImpact Combined Shear-Compression Testing of Honeycombs Using a Rotatable Hopkinson BarThe Evolution of the {110} and {236} Recrystallization Textures in Cu Alloys and High Mn Austenitic Steels with the Brass Rolling TextureCrystal Plasticity Analysis of Change in Active Slip Systems of a-Phase of Ti-6Al-4V Alloy under Cyclic LoadingDislocation Dynamics Simulation of Interaction between Prismatic Dislocation Loops and Voids in Irradiated Thin FilmsAnisotropic Elastic Field of 3D Prismatic Dislocation Loops in Bounded and Voided Single Crystal FilmsMeasurement of Bauschinger Effect in Ultrafine-Grained A1070 Aluminum RodsA Simulation of Ferroelastic Phase Formation by Using Phase Field ModelQuantitative Evaluation of Deformation Twinning Behavior in Polycrystalline Pure MagnesiumSubsequent Yield Behavior of Hexagonal Metal with Rolling TextureOn the Role of Grains in Plastic Deformation and Low Cycle Fatigue of Polycrystalline MetalHigh Temperature Deformation of Cast ZW11 Magnesium Alloy with Very Large Grain SizeMD Analysis of Effect of Relative Humidity on Molecular Chain?s Network Structure of PEMMultiscale Simulation of Dynamic Recrystallization for a-Mg Phase in Mg/LPSO Alloys Based on Multi-Phase-Field and Dislocation-Based Crystal Plasticity ModelMacroscopic Yield Function Predicted by Crystal Plasticity Simulation on Ultrafine-Grained AluminumNumerical Biaxial Tensile Test of Aluminum Alloy Sheets Using Crystal Plasticity Model Implemented in Commercial FEM SoftwareDevelopment of Simulation Technology for Production of Porous Polymeric MembranesCrystal Plasticity Analysis of Mechanical Response in Two Phase Alloys with Dispersion of Fine ParticlesThermo-Mechanical Cyclic Plastic Behavior of 304 Stainless Steel at Large Temperature RangesEstimation of Residual Stress Change due to Cyclic Loading by Classical Elastoplasticity Model and Subloading Surface ModelApplication of Subloading Surface Model to Heat Treatment Simulation Based on Explicit Finite Element MethodEvaluation of the Stress Distribution by the Stepped Load Indentation Test with Constant DepthBiaxial Ratchetting Deformation of Solders Considering Halt ConditionsEstimation of Plastic and Creep Strain Development of SAC Solder under Cyclic Loading by Using Stepped Ramp WavesAn Improved Thermo-Ratcheting Boundary of Pressure PipelineStudy of Micro Deformation of Austenitic-Ferrite Duplex Stainless Steel by Nanoindentation MethodEffect of the Non-Associativity of Plasticity Model on the Cyclic Behavior of GeomaterialsThermo-Elasto-Plastic Analysis of Pearlitic Transformation Plasticity under Combined Bending-Tensile LoadingFatigue of Extruded 2017A Aluminum Alloy Subjected to Non-Proportional Loading PathsElastic and Plastic Analysis of O-Ring Seal for Reactor Pressure VesselCalculation Strategy for the Determination of Plasticity Correction FactorsDescription of Closure of Cyclic Stress-Strain Loop and Ratcheting Based on Y-U ModelOn the Choice of the Power Law Flow Rule and its Consequences in Crystal PlasticityEvaluation of Very High Cycle Fatigue Properties of ?-Titanium Alloy by Using an Ultrasonic Tensile-Compressive Fatigue Testing MachineRelaxation Oscillation in the Viscous Flow of Borosilicate GlassDeformation Properties of 3D Printed Shape Memory PolymerFailure Criteria of Adhesive Joints between Aluminum Circular Pipes under Multiaxial Stress StateImprovement of Corrosion Fatigue Strength for TiNi Shape Memory AlloyExperimental Study and Finite Element Simulation of Bending Fretting Fatigue for Tempered 42CrMo SteelFirst Principles Calculations of Stress-Induced Structural Changes of Supercooled Borosilicate GlassSuper-Elastic Behavior Analysis of Shape Memory Alloy Vascular StentElasto-Viscoplastic Analysis of Slanting-Weft Woven Fabric Composites Based on Homogenization TheoryEffects of Blowing Ar on Inclusion and Properties of AZ61 Magnesium AlloyTemperature Dependent Plastic Deformation Behavior of AZ31 Magnesium Alloy in Uniaxial and Biaxial CompressionsEffects of Two Scaling Exponents on Swelling-Induced Softening of Elastomers under Equibiaxial and Planar ExtensionsTwo-Scale Analysis of Thermal Behavior of CFRP Laminates Based on a Thermoelastoviscoplastic Homogenization TheoryEvaluation of Micro/Meso/Macro Thermal Properties of Plain-Woven LaminatesAtomistic-Level Simulation of Deformation in PolycarbonateAtomistic Model Analysis of Deformation of Carbon Nanotubes under Axial CompressionComputational Simulation of Scale-Dependent Non-Uniform Deformation Behavior of Polymer FoamEffects of Non-Associated Flow Rule on AHSS Shear FractureInfluence of Geometrical Imperfection on Failure Mode of DP780 Steel Utilizing Damage Models Embedded RVE TechniqueCharacterizing Fracture Development in Ti-Alloy with I-Type Cracks Using Acoustic Emission and Thermal Infrared ImagingApplication of Uncoupled Damage Models to Predict Ductile Fracture in Sheet Metal BlankingAnisotropic Damage Evolution for Perforated Sheet under Tensile DeformationBending Behavior to Fracture of an Aluminium Alloy Involving Pre-StrainEffect of Lattice Rotation on Hardening Behavior of HCP MetalsA New Algorithm of the Boundary Restraining Force for One-Step Inverse AnalysisThe Refinement Algorithm of Blank Outline Based on One-Step Inverse AnalysisAn Adaptive Triangle Mesh Generation for One Step Inverse AnalysisEffect of Optimisation Parameters in Topology OptimisationWarping Behavior of Thin Strip with Single-Drive RollingInfluence of Dog-Bone Width on End Profile in Plan View Pattern Control Method for Plate RollingTransient Thermal Analysis of Cold Strip Rolling Considering Rough Surface ContactsThe Numerical Simulation of Multi-Stage Sheet Metal Forming Based on Modified Yoshida-Uemori Hardening ModelNumerical Investigation on Mini Internal Gear Forging ProcessSpringback Analysis of Aluminum Alloy Sheet Metals by Yoshida-Uemori ModelWear Mechanism and Ability for Recovery of Tool Steel on Blanking Die ProcessInvestigation on Wrinkling Deformation in Multi-Pass Incremental Sheet Forming ProcessAn Experimental and Numerical Study on Forming Force, Fracture Behavior, and Strain States in Two Point Incremental Forming ProcessEffect of Material Anisotropies of Hot-Rolled High-Strength Steel Sheet on Localized Deformation Behavior in Hole Expansion - Part-I Experimental Consideration to Circular and Oval HoleEffect of Material Anisotropies of Hot-Rolled High-Strength Steel Sheet on Localized Deformation Behavior in Hole Expansion - Part-II Simulation and Evaluation of Anisotropic Yield FunctionDevelopment of a Rubber Diaphragm Forming Simulation System Based on ABAQUSImprovement of Shape Accuracy in Press-Formed Parts of High-Strength Steel by Springback-Root-Cause AnalysisStudy of Large-Expansion-Ratio Tube Hydroforming with Movable DiesResearch on Stability of Panel Ultrasonic Peening FormingAsymmetric-Shaped Bending of Adhesively Bonded Sheet MetalsStudy on Magnesium Alloy Thin Sheet by Symmetric Rolling and Asymmetric Rolling ProcessPulsed Laser Surface Treatment for Improvement of MachinabilityResidual Stress Analysis Considering Phase Transformation and Transformation Plasticity for Heat-Treated Large Size ShaftA Yield Function for Anisotropic Sheet Material Described by 3rd-Degree Spline Curve and its ApplicationsElastic Modulus Model Based on Dislocation Density and its Application on Aluminum Alloy 5052Friction Stir Forming of Aluminum Alloy Gear-RacksEffect of Stress Relaxation on Springback of Steel Sheet in Warm FormingDetermination of the Anisotropic Hardening of Sheet Metals at Large Strain from Stretch Bending TestSimple Springback Cause Analysis Using Measured Shapes of Dies and Pressed PartOn the Scale Dependence of Micro Hydromechanical Deep DrawingEqui-Plastic Work Locus of 5000 Series Aluminum Alloy Sheet at Warm TemperatureOptimum Design of Si-Cr Alloy Springs for Seismic Vibration IsolatorEffects of Aging Process in Hot Forming with Synchronous Cooling on Properties of AA2024

Über Autor(innen)

Eds. Fusahito Yoshida and Hiroshi Hamasaki