Sonstiges, Englisch, Band Volume 795, 774 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Selected, peer reviewed papers from the 2nd International Conference on Sustainable Materials (ICoSM 2013), March 26-27, 2013, Penang, Malaysia
Sonstiges, Englisch, Band Volume 795, 774 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-531-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Rate of Rare Earths Leaching in HCl, H2SO4 and HNO3Short Review: Ceramic Foam Fabrication Techniques for Wastewater Treatment ApplicationImpact of Controlled Hydrophobicity of the Organically Modified Silicates on the Properties of Biomedical Thermoplastic Polyurethane (TPU) NanocompositesInfluence of Rice Husk Ash on the Engineering Properties of Fired-Clay BrickStructural, Optical and Antibacterial Properties of ZnO Commercial Powder GradesThe Effect of Titanium Oxide Content in Piston Coating on the Performance and Emission Characteristics of Bio-Diesel Fuelled C.I. EngineEffect of Carbon Nanotubes on Properties of Graphite/Carbon Black/Polypropylene NanocompositesAnalysis of Stress and Strain in ZnO Nanoparticle-Bi2O3-Mn2O3 Varistor Ceramics at Different Annealing TemperaturesWear Resistance Characteristic of Vegetable OilEffect of Sintering Temperature on Silver-Copper Nanopaste as High Temperature Die Attach MaterialSynthesis and Characterization of Pure Magnesium / Bio-Glass CompositeEffect of Anodizing Voltage on the Growth Kinetics of Porous Anodic Alumina on Al-0.5 wt% Mn AlloysA "Green" Rubber Compound for Making Tire Tread with Antistatic FeatureVoid Content Determination of Fiber Reinforced Polymers by Acid Digestion MethodIdentification of Limiting Friction Coefficient towards Improved Hip ProsthesesMechanical Properties of Dissimilar Welds between Stainless Steel and Mild SteelFabrication and Characterization of Porous F-75 for Potential Application in Tissue EngineeringEffect of Space Holder and Compaction Pressure on the Porosity of Sintered CopperEffect of Spot Welding Current and Cycles on the Mechanical Properties of Welded Galvanized Steel SheetsSand Replacement Materials (SRM) in Sustainable Cement Composites; A Concise ReviewSustainable Porous Materials for Gas Adsorption Applications; A Concise ReviewCharacterization of Porous Aluminum Fabricated via Sintering-Dissolution Process (SDP)Fabrication and Characterization of Organic Light-Emitting Diodes Containing Small Molecules Blends as Emissive LayerAnnealing Effect on Small Molecules Blend Organic Light-Emitting DiodesBiodegradability of Starch Based Films Blend with LLDPE and PVAPhysical and Morphological Properties of Styrene Butadiene Rubber / Recycled Chloroprene Rubber (SBR/CRr) BlendsStatic X-Ray Scans on the Titanium Hydride (TiH2) Powder during DehydrogenationThe Development of Cement Composites Reinforced Coconut Fiber with Fly Ash Addition: Mechanical Properties and Fracture BehaviorEffects of NR and Liquid NR Loading on Swelling Behaviour of TPU/NR BlendsPerformance of Surface Modification of Polyvinylidene Fluoride Hollow Fiber Membrane in Membrane DistillationThermal Management of Electronic Components by Using Computational Fluid Dynamic (CFD) Software, FLUENTTM in Several Material Applications (Epoxy, Composite Material & Nanosilver)Characterization of ZnO Nanopowder and Antibacterial Response against Staphylococcus aureus under UVA IlluminationGranular Activated Carbons Impregnated by Iron Oxide (Fe-GACs) for Simultaneous Adsorption and Photodecomposition of Methylene Blue in an Oxalate SolutionA New Invention of Thermal Pad Using Sol-Gel Nanosilver Doped Silica Film in Plastic Leaded Chip Carrier (PLCC) Application by Using Computational Fluid Dynamic Sofrware, CFD AnalysisPerformance and Emission Characteristics of Diesel Engine Running on Blended Palm OilEffect of Dolomite on Pyrolysis of Rice StrawThe Comparison between Four PLCC Packages and Eight PLCC Packages in Personal Computer (PC) Using Computational Fluid Dynamic (CFD), FLUENT SoftwareTM Using Epoxy Moulding Compound Material (EMC)The Effect of Rotational Speed on Flow Behavior and Weld Properties in Friction Stir Welding of Pure AluminumStructural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connectors under Axial Load: Preliminary ResultThe Effect of Iron Fillings Waste Contents on the Attenuation Level of Anti-Radiation Shielding ConcreteAlteration in the Microstructure of Fly Ash Geopolymers upon Exposure to Elevated TemperaturesEffect of Buffer and pH on the Protein Extraction for Chicken MeatThe Role of Direct Chilling, Retrogression and Reaging Treatment on Mechanical Properties of High Strength Aluminum AlloyInfluence of Current Density on Porous Silicon CharacteristicsA Study on the Effect of Modified Electrolyte to the Formation of AAO Membrane in Anodising ProcessStructural and Morphological Studies of Cadmium Sulfide NanostructuresSynthesis and Characterization of Electroless Copper Coated SiC ParticlesThe Thermal Expansion Behaviors of Cu-SiCp CompositesThe Influences of Cu-Coated SiCp on the Porosity and Thermal Expansion Behavior of Cu-SiCp CompositesA Brief Review of Layered Rock Salt Cathode Materials for Lithium Ion BatteriesPreparation of Cyclopentyl Trisilanol Silsesquioxanes - Modified Natural Rubber (CpSSQ(OH)3 ENR-50) Composite Hybrid in the Presence of HCL AcidMemristive Behavior of TiO2 Nanostructures Grown at Different Substrate Positioning by Immersion MethodCharacterization and Optimization of Heavy Metals Biosorption by Fish Scales
Cucumis melo Rind as Biosorbent to Remove Fe(II) and Mn(II) from Synthetic Groundwater SolutionFabrication of Cu-SiCp Composites via the Electroless Copper Coating Process for the Electronic Packaging ApplicationsChrome Mask Design for Microfluidic FabricationPreparation and Characterization of Polypropylene Biocomposites Reinforced Palm Fruitlet FiberEffects of Calcium Carbonate on Melt Flow and Mechanical Properties of Rice Husk/HDPE and Kenaf/HDPE Hybrid CompositesStress Analysis and Failure Characterizations of V-Shaped Epoxy Adhesively Bonded JointSubstrate Temperature Dependence on Sputtered Titania Thin FilmThe Effects of Extraction Mediums on the Properties of Porous Epoxy Using Natural Rubber Latex as Void TemplateEffect of Deposition Time on Properties of ZrO2 Coating Prepared Using Electrolytic MethodLong Physico-Chemical and Biological Monitoring for Treated Artificial Tidal Flats with Recycled Paper Sludge in Ago Bay, JapanEffect of Compatibilizer on Mechanical Properties and Water Absorption Behaviour of Coconut Fiber Filled Polypropylene CompositeShort Review of Ultrafiltration of Polymer Membrane as a Self-Cleaning and Antifouling in the Wastewater SystemEffect pf Thermoplastic Polymer Waste (PET) in Lightweight ConcreteDesign and Fabrication of PDMS Microchamber for Fast Reaction Assays in Biosensing ApplicationEffect of Zeta Potential of Stanum Oxide (SnO2) on Electrophoretic Deposition (EPD) on Porous AluminaResponse of Functionality Graded Hydroxyapatite/F-75 in Saline Solution 0.9% NaClEffect of Compaction Pressure on Microstructure and Properties of Copper-Based Composite Prepared by Mechanical Alloying and Powder MetallurgyThe Mechanical Properties of PET Fiber Reinforced Concrete from Recycled Bottle WastesPerformance of Concrete Using Light Waste PET FibreRelationship between Compressive, Splitting Tensile and Flexural Strength of Concrete Containing Granulated Waste Polyethylene Terephthalate (PET) Bottles as Fine AggregateEffect of Fiber Treatment on the Fiber Strength of Kenaf Bast Fiber as Reinforcing Material in Polymer CompositeThe Effects of Dynamic Vulcanization in Virgin Polyethylene (vPE)/Recycled Polyethylene (rPE)/Ethylene Propylene Diene Terpolymer (EPDM) Blends: Thermal Properties and Swelling BehaviourThe Effects of Carbon Black, Silica and Calcium Carbonate in Virgin PE/Recycle PE/EPDM Blends: Thermal Properties & Swelling AnalysisThermal Properties of Different Recycled Acrylonitrile-Butadiene Rubber Glove (NBRr) Size and its Blend Ratios on SBR/NBRr BlendsThe Effect of Different Sizes "Batu Reput" (Dolomite) as a Filler in SMR L and ENR-50Microfluidic Photomask Design Using CAD Software for Application in Lab-On-Chip Biomedical NanodiagnosticsMask Design Platform for Zinc Oxide Nanowire GrowthNanoelectrode Chrome Photomask Design and Specification for Biosensor FabricationElectrical Properties Dependence on Substrate Temperature of Sputtered ZnO Nanoparticles Thin Films on Teflon SubstratesThe Properties of Recycled Copper Filled Epoxy/Unsaturated Polyester CompositesStructural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connectors under Eccentric Load: Preliminary ResultThe Effect of Sintering Temperature to the Properties of Zinc OxideEffects of Winding Angles in Biaxial Ultimate Elastic Wall Stress (UEWS) Tests of Glass Gibre Reinforced Epoxy (GRE) Composite PipesTensile Properties LLDPE/Soya Spent Powder Blends: Oven AgingThermal Properties of Linear-Low Density Polyethylene (LLDPE)/Soya Spent Powder Blends with the Addition of Epoxidised Natural RubberThe Existing of Oxygen Nonstoichiometry in Complex Lithium OxidesComparison of Mechanical Properties of Polypropylene/Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites Modified with Silane and Acetic Anhydride CompoundEffects of Recycled-Aluminum Additions on the Mechanical Properties of Sn-0.7Cu/Cu-Substrate Lead-Free Solder JointsThermal Properties of Sn-0.7Cu/re-Al Composite Lead-Free SolderHigh Temperature Creep and Hydrogen Embrittlement Failure of a Steam Trap Bypass TubeNumerical Simulation of Microfluidic SeparatorsDetermination of Interlayer Mixing and Oxygen Non-Stoichiometry in LiNi0.8Mn0.1Co0.1O2-d Using Powder Diffraction DataCorrosion Behaviour of Anodised Powder Metallurgy Aluminium-Magnesium CompositesMetallurgical Failure Analysis of a Closed Recirculation System Water Cooling PipeStructure Refinement Strategy of Li-Based Complex Oxides Using GSAS-EXPGUI Software PackageOverview of Pathogenic Micro-Organisms Destruction in Contaminated Water by Oxide PhotocatalysisFailure Investigation on Rusty Mesh Strainer of Petrochemical PlantJoining of Dissimilar 6063 Aluminium Alloy ? 316L Stainless Steel by Spot Welding: Tensile Shear Strength and Heat TreatmentThe Effects of Fly Ash and Polystyrene Bead Additions on Compressive Strength of Foamed Cement CompositesDielectric Properties of Barium Titanate with Different StoichiometryEffect of Aging Time towards Intermetallic Compound (IMC) Growth Kinetics Formation for Sn-0.7Cu-Si3N4 Composite Solder on Copper SubstrateCorrosion Performance of Reinforcement Bar in Geopolymer Concrete Compare with its Performance in Ordinary Portland Cement Concrete: A Short ReviewEffect of Sintering Time on the Properties of LaYO3 Doped with ZrO2 Solid ElectrolyteZn-Sn Based High Temperature Solder - A Short ReviewEffect of Aging Temperature on the Intermetallic Compound (IMC) Formation of Sn-0.7Cu/Si3N4 Composite SolderFlexural Analysis of Polyurethane Foam and Sandwich Composite Foam via Experimental and Finite Element CMethodsElectrochemical Corrosion Behaviour of Mg-(Ca,Mn) Sacrificial AnodesCorrosion Behavior of Al-Cu-Ni-Y AlloysElectroless Ni-P-Cg(Graphite)-SiC Composite Coating on Cast AlSi AlloyEffect of Heat Treatment on Ni-P-Cg(Graphite)-SiC Composite Coated Cast AlSi AlloyCure Characteristics and Hardness of Recycled Latex Catheter (LCr) Filled with Standard Malaysia Rubber (SMR L) CompoundsEffect of Compost Medium on Oxidative-Linear Low Density Polyethylene/Soya Powder BlendsMicrostructural and Optical Properties of SnO Thin Film by Thermal EvaporationDesigning Microchannels Separator Mask for Lithography ProcessMechanism of Current Transport for a Photoelectrochemical Cells of ITO/Cu2O/PVC?LiClO4/GraphiteThe Effect of Sintering on the Properties of Powder Metallurgy (PM) F-75 AlloyMicrostructure and Interface Analysis of Glass Particulate Reinforced Aluminum Matrix CompositeRecycled High Density Polyethylene / Natural Rubber / Chicken Feather Fibers (RHDPE/NR/CFF) Composites: The Effects of Fiber Loading and Benzyl Urea on Tensile Properties and Morphology AnalysisMathematical Model of Elastic Crack Interaction and Two-Dimensional Finite Element Analysis Based on Griffith Energy Release RateEffect of Process Parameters on the Cooling Performance of Liquid Cooling System for Electronic ApplicationMachining Performance of Reinforced Alumina Insert in End Milling of AISI 1018 SteelNumerical Investigation of Heat Transfer of Twelve Plastic Leaded Chip Carrier (PLCC) by Using Computational Fluid Dynamic, FLUENTTM SoftwareThe Effect of Chemical Modification on Properties of Polypropylene/Bagasse Fiber Composites Compounding Using Two Roll MillGrowth of Vertically Aligned ZnO Nanorods Arrays by Hydrothermal MethodPotential of Upgrading Domestic Biomass into a Higher Energy Density via Torrefaction ProcessSimulated Body Fluid Sorption and Solubility of Silica Reinforced Dental Resin CompositesThe Effect of Different Alkaline Treatment Condition on Flexural Properties of Kenaf Bast-Unsaturated Polyester CompositeProduction of Wollastonite from Local ResourcesElectrical Properties of Fresnoite Ba2TiSi2O8 Using Impedance SpectroscopyCharacterizations on the Effect of Processing of Polymers Blend with Petroleum Coke (Part I)Organic Dye Degradation with TiO2 Catalyst/AAO Template in the Presence of H2O2Electrochemical Measurement of PBS Using Cyclic Voltammetry and AAO Fabricated at Ambient Temperature and Low PotentialFerroelectric and Relaxor Ferroelectric to Paralectric Transition Based on Lead Magnesium Niobate (PMN) MaterialsEffects of Fly Ash Addition on Compressive Strength and Flexural Strength of Foamed Cement CompositesCurrent Trend in Simulation: A Study Simulation of Poly-Silicon Nanowire Using COMSOL MultiphysicsKinetic and Thermodynamic Studies on Adsorption of Copper Ions onto Pomelo Peel (Citrus grandis)Alteration of Solution Treatment Condition to the Precipitation Behavior A319 AlloyDevelopment of Nanocement Mortar as a Construction MaterialEffect of Silver Ions on the Structural and Antibacterial Properties of Bone Replacement MaterialGreen Bricks from WasteExtraction of Silica from Palm Ash Using Citric Acid Leaching Treatment: Preliminary ResultStudy on Synthesis of Polypyrrole via Chemical Polymerization MethodEffect of Milling Time on Particle Size and Surface Morphology of Commercial Zeolite by Planetary Ball MillPreparation of Colossal Magnetoresistance Ploycrystalline via Sol-Gel Technique: A Short ReviewThe Atomic Force Microscope Study of Self-Assembled Silicon Nanodots Growth Using Magnetron Sputtering SystemFormation of Gold Nanoparticles Film on Silicon Wafer by Self-Assembled MethodEffect of Rice Husk on Fired Ceramic Shell Strength
