2nd International Conference on Sustainable Materials (ICoSM 2013)
Erscheinungsjahr 2013
ISBN: 978-3-03785-811-0
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the 2nd International Conference on Sustainable Materials (ICoSM 2013), March 26-27, 2013, Penang, Malaysia
Buch, Englisch, 774 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1450 g
ISBN: 978-3-03785-811-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committees
Rate of Rare Earths Leaching in HCl, H2SO4 and HNO3
Short Review: Ceramic Foam Fabrication Techniques for Wastewater Treatment Application
Impact of Controlled Hydrophobicity of the Organically Modified Silicates on the Properties of Biomedical Thermoplastic Polyurethane (TPU) Nanocomposites
Influence of Rice Husk Ash on the Engineering Properties of Fired-Clay Brick
Structural, Optical and Antibacterial Properties of ZnO Commercial Powder Grades
The Effect of Titanium Oxide Content in Piston Coating on the Performance and Emission Characteristics of Bio-Diesel Fuelled C.I. Engine
Effect of Carbon Nanotubes on Properties of Graphite/Carbon Black/Polypropylene Nanocomposites
Analysis of Stress and Strain in ZnO Nanoparticle-Bi2O3-Mn2O3 Varistor Ceramics at Different Annealing Temperatures
Wear Resistance Characteristic of Vegetable Oil
Effect of Sintering Temperature on Silver-Copper Nanopaste as High Temperature Die Attach Material
Synthesis and Characterization of Pure Magnesium / Bio-Glass Composite
Effect of Anodizing Voltage on the Growth Kinetics of Porous Anodic Alumina on Al-0.5 wt% Mn Alloys
A "Green" Rubber Compound for Making Tire Tread with Antistatic Feature
Void Content Determination of Fiber Reinforced Polymers by Acid Digestion Method
Identification of Limiting Friction Coefficient towards Improved Hip Prostheses
Mechanical Properties of Dissimilar Welds between Stainless Steel and Mild Steel
Fabrication and Characterization of Porous F-75 for Potential Application in Tissue Engineering
Effect of Space Holder and Compaction Pressure on the Porosity of Sintered Copper
Effect of Spot Welding Current and Cycles on the Mechanical Properties of Welded Galvanized Steel Sheets
Sand Replacement Materials (SRM) in Sustainable Cement Composites; A Concise Review
Sustainable Porous Materials for Gas Adsorption Applications; A Concise Review
Characterization of Porous Aluminum Fabricated via Sintering-Dissolution Process (SDP)
Fabrication and Characterization of Organic Light-Emitting Diodes Containing Small Molecules Blends as Emissive Layer
Annealing Effect on Small Molecules Blend Organic Light-Emitting Diodes
Biodegradability of Starch Based Films Blend with LLDPE and PVA
Physical and Morphological Properties of Styrene Butadiene Rubber / Recycled Chloroprene Rubber (SBR/CRr) Blends
Static X-Ray Scans on the Titanium Hydride (TiH2) Powder during Dehydrogenation
The Development of Cement Composites Reinforced Coconut Fiber with Fly Ash Addition: Mechanical Properties and Fracture Behavior
Effects of NR and Liquid NR Loading on Swelling Behaviour of TPU/NR Blends
Performance of Surface Modification of Polyvinylidene Fluoride Hollow Fiber Membrane in Membrane Distillation
Thermal Management of Electronic Components by Using Computational Fluid Dynamic (CFD) Software, FLUENTTM in Several Material Applications (Epoxy, Composite Material & Nanosilver)
Characterization of ZnO Nanopowder and Antibacterial Response against Staphylococcus aureus under UVA Illumination
Granular Activated Carbons Impregnated by Iron Oxide (Fe-GACs) for Simultaneous Adsorption and Photodecomposition of Methylene Blue in an Oxalate Solution
A New Invention of Thermal Pad Using Sol-Gel Nanosilver Doped Silica Film in Plastic Leaded Chip Carrier (PLCC) Application by Using Computational Fluid Dynamic Sofrware, CFD Analysis
Performance and Emission Characteristics of Diesel Engine Running on Blended Palm Oil
Effect of Dolomite on Pyrolysis of Rice Straw
The Comparison between Four PLCC Packages and Eight PLCC Packages in Personal Computer (PC) Using Computational Fluid Dynamic (CFD), FLUENT SoftwareTM Using Epoxy Moulding Compound Material (EMC)
The Effect of Rotational Speed on Flow Behavior and Weld Properties in Friction Stir Welding of Pure Aluminum
Structural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connectors under Axial Load: Preliminary Result
The Effect of Iron Fillings Waste Contents on the Attenuation Level of Anti-Radiation Shielding Concrete
Alteration in the Microstructure of Fly Ash Geopolymers upon Exposure to Elevated Temperatures
Effect of Buffer and pH on the Protein Extraction for Chicken Meat
The Role of Direct Chilling, Retrogression and Reaging Treatment on Mechanical Properties of High Strength Aluminum Alloy
Influence of Current Density on Porous Silicon Characteristics
A Study on the Effect of Modified Electrolyte to the Formation of AAO Membrane in Anodising Process
Structural and Morphological Studies of Cadmium Sulfide Nanostructures
Synthesis and Characterization of Electroless Copper Coated SiC Particles
The Thermal Expansion Behaviors of Cu-SiCp Composites
The Influences of Cu-Coated SiCp on the Porosity and Thermal Expansion Behavior of Cu-SiCp Composites
A Brief Review of Layered Rock Salt Cathode Materials for Lithium Ion Batteries
Preparation of Cyclopentyl Trisilanol Silsesquioxanes - Modified Natural Rubber (CpSSQ(OH)3 ENR-50) Composite Hybrid in the Presence of HCL Acid
Memristive Behavior of TiO2 Nanostructures Grown at Different Substrate Positioning by Immersion Method
Characterization and Optimization of Heavy Metals Biosorption by Fish Scales
Cucumis melo Rind as Biosorbent to Remove Fe(II) and Mn(II) from Synthetic Groundwater Solution
Fabrication of Cu-SiCp Composites via the Electroless Copper Coating Process for the Electronic Packaging Applications
Chrome Mask Design for Microfluidic Fabrication
Preparation and Characterization of Polypropylene Biocomposites Reinforced Palm Fruitlet Fiber
Effects of Calcium Carbonate on Melt Flow and Mechanical Properties of Rice Husk/HDPE and Kenaf/HDPE Hybrid Composites
Stress Analysis and Failure Characterizations of V-Shaped Epoxy Adhesively Bonded Joint
Substrate Temperature Dependence on Sputtered Titania Thin Film
The Effects of Extraction Mediums on the Properties of Porous Epoxy Using Natural Rubber Latex as Void Template
Effect of Deposition Time on Properties of ZrO2 Coating Prepared Using Electrolytic Method
Long Physico-Chemical and Biological Monitoring for Treated Artificial Tidal Flats with Recycled Paper Sludge in Ago Bay, Japan
Effect of Compatibilizer on Mechanical Properties and Water Absorption Behaviour of Coconut Fiber Filled Polypropylene Composite
Short Review of Ultrafiltration of Polymer Membrane as a Self-Cleaning and Antifouling in the Wastewater System
Effect pf Thermoplastic Polymer Waste (PET) in Lightweight Concrete
Design and Fabrication of PDMS Microchamber for Fast Reaction Assays in Biosensing Application
Effect of Zeta Potential of Stanum Oxide (SnO2) on Electrophoretic Deposition (EPD) on Porous Alumina
Response of Functionality Graded Hydroxyapatite/F-75 in Saline Solution 0.9% NaCl
Effect of Compaction Pressure on Microstructure and Properties of Copper-Based Composite Prepared by Mechanical Alloying and Powder Metallurgy
The Mechanical Properties of PET Fiber Reinforced Concrete from Recycled Bottle Wastes
Performance of Concrete Using Light Waste PET Fibre
Relationship between Compressive, Splitting Tensile and Flexural Strength of Concrete Containing Granulated Waste Polyethylene Terephthalate (PET) Bottles as Fine Aggregate
Effect of Fiber Treatment on the Fiber Strength of Kenaf Bast Fiber as Reinforcing Material in Polymer Composite
The Effects of Dynamic Vulcanization in Virgin Polyethylene (vPE)/Recycled Polyethylene (rPE)/Ethylene Propylene Diene Terpolymer (EPDM) Blends: Thermal Properties and Swelling Behaviour
The Effects of Carbon Black, Silica and Calcium Carbonate in Virgin PE/Recycle PE/EPDM Blends: Thermal Properties & Swelling Analysis
Thermal Properties of Different Recycled Acrylonitrile-Butadiene Rubber Glove (NBRr) Size and its Blend Ratios on SBR/NBRr Blends
The Effect of Different Sizes "Batu Reput" (Dolomite) as a Filler in SMR L and ENR-50
Microfluidic Photomask Design Using CAD Software for Application in Lab-On-Chip Biomedical Nanodiagnostics
Mask Design Platform for Zinc Oxide Nanowire Growth
Nanoelectrode Chrome Photomask Design and Specification for Biosensor Fabrication
Electrical Properties Dependence on Substrate Temperature of Sputtered ZnO Nanoparticles Thin Films on Teflon Substrates
The Properties of Recycled Copper Filled Epoxy/Unsaturated Polyester Composites
Structural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connectors under Eccentric Load: Preliminary Result
The Effect of Sintering Temperature to the Properties of Zinc Oxide
Effects of Winding Angles in Biaxial Ultimate Elastic Wall Stress (UEWS) Tests of Glass Gibre Reinforced Epoxy (GRE) Composite Pipes
Tensile Properties LLDPE/Soya Spent Powder Blends: Oven Aging
Thermal Properties of Linear-Low Density Polyethylene (LLDPE)/Soya Spent Powder Blends with the Addition of Epoxidised Natural Rubber
The Existing of Oxygen Nonstoichiometry in Complex Lithium Oxides
Comparison of Mechanical Properties of Polypropylene/Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites Modified with Silane and Acetic Anhydride Compound
Effects of Recycled-Aluminum Additions on the Mechanical Properties of Sn-0.7Cu/Cu-Substrate Lead-Free Solder Joints
Thermal Properties of Sn-0.7Cu/re-Al Composite Lead-Free Solder
High Temperature Creep and Hydrogen Embrittlement Failure of a Steam Trap Bypass Tube
Numerical Simulation of Microfluidic Separators
Determination of Interlayer Mixing and Oxygen Non-Stoichiometry in LiNi0.8Mn0.1Co0.1O2-d Using Powder Diffraction Data
Corrosion Behaviour of Anodised Powder Metallurgy Aluminium-Magnesium Composites
Metallurgical Failure Analysis of a Closed Recirculation System Water Cooling Pipe
Structure Refinement Strategy of Li-Based Complex Oxides Using GSAS-EXPGUI Software Package
Overview of Pathogenic Micro-Organisms Destruction in Contaminated Water by Oxide Photocatalysis
Failure Investigation on Rusty Mesh Strainer of Petrochemical Plant
Joining of Dissimilar 6063 Aluminium Alloy – 316L Stainless Steel by Spot Welding: Tensile Shear Strength and Heat Treatment
The Effects of Fly Ash and Polystyrene Bead Additions on Compressive Strength of Foamed Cement Composites
Dielectric Properties of Barium Titanate with Different Stoichiometry
Effect of Aging Time towards Intermetallic Compound (IMC) Growth Kinetics Formation for Sn-0.7Cu-Si3N4 Composite Solder on Copper Substrate
Corrosion Performance of Reinforcement Bar in Geopolymer Concrete Compare with its Performance in Ordinary Portland Cement Concrete: A Short Review
Effect of Sintering Time on the Properties of LaYO3 Doped with ZrO2 Solid Electrolyte
Zn-Sn Based High Temperature Solder - A Short Review
Effect of Aging Temperature on the Intermetallic Compound (IMC) Formation of Sn-0.7Cu/Si3N4 Composite Solder
Flexural Analysis of Polyurethane Foam and Sandwich Composite Foam via Experimental and Finite Element CMethods
Electrochemical Corrosion Behaviour of Mg-(Ca,Mn) Sacrificial Anodes
Corrosion Behavior of Al-Cu-Ni-Y Alloys
Electroless Ni-P-Cg(Graphite)-SiC Composite Coating on Cast AlSi Alloy
Effect of Heat Treatment on Ni-P-Cg(Graphite)-SiC Composite Coated Cast AlSi Alloy
Cure Characteristics and Hardness of Recycled Latex Catheter (LCr) Filled with Standard Malaysia Rubber (SMR L) Compounds
Effect of Compost Medium on Oxidative-Linear Low Density Polyethylene/Soya Powder Blends
Microstructural and Optical Properties of SnO Thin Film by Thermal Evaporation
Designing Microchannels Separator Mask for Lithography Process
Mechanism of Current Transport for a Photoelectrochemical Cells of ITO/Cu2O/PVC–LiClO4/Graphite
The Effect of Sintering on the Properties of Powder Metallurgy (PM) F-75 Alloy
Microstructure and Interface Analysis of Glass Particulate Reinforced Aluminum Matrix Composite
Recycled High Density Polyethylene / Natural Rubber / Chicken Feather Fibers (RHDPE/NR/CFF) Composites: The Effects of Fiber Loading and Benzyl Urea on Tensile Properties and Morphology Analysis
Mathematical Model of Elastic Crack Interaction and Two-Dimensional Finite Element Analysis Based on Griffith Energy Release Rate
Effect of Process Parameters on the Cooling Performance of Liquid Cooling System for Electronic Application
Machining Performance of Reinforced Alumina Insert in End Milling of AISI 1018 Steel
Numerical Investigation of Heat Transfer of Twelve Plastic Leaded Chip Carrier (PLCC) by Using Computational Fluid Dynamic, FLUENTTM Software
The Effect of Chemical Modification on Properties of Polypropylene/Bagasse Fiber Composites Compounding Using Two Roll Mill
Growth of Vertically Aligned ZnO Nanorods Arrays by Hydrothermal Method
Potential of Upgrading Domestic Biomass into a Higher Energy Density via Torrefaction Process
Simulated Body Fluid Sorption and Solubility of Silica Reinforced Dental Resin Composites
The Effect of Different Alkaline Treatment Condition on Flexural Properties of Kenaf Bast-Unsaturated Polyester Composite
Production of Wollastonite from Local Resources
Electrical Properties of Fresnoite Ba2TiSi2O8 Using Impedance Spectroscopy
Characterizations on the Effect of Processing of Polymers Blend with Petroleum Coke (Part I)
Organic Dye Degradation with TiO2 Catalyst/AAO Template in the Presence of H2O2
Electrochemical Measurement of PBS Using Cyclic Voltammetry and AAO Fabricated at Ambient Temperature and Low Potential
Ferroelectric and Relaxor Ferroelectric to Paralectric Transition Based on Lead Magnesium Niobate (PMN) Materials
Effects of Fly Ash Addition on Compressive Strength and Flexural Strength of Foamed Cement Composites
Current Trend in Simulation: A Study Simulation of Poly-Silicon Nanowire Using COMSOL Multiphysics
Kinetic and Thermodynamic Studies on Adsorption of Copper Ions onto Pomelo Peel (Citrus grandis)
Alteration of Solution Treatment Condition to the Precipitation Behavior A319 Alloy
Development of Nanocement Mortar as a Construction Material
Effect of Silver Ions on the Structural and Antibacterial Properties of Bone Replacement Material
Green Bricks from Waste
Extraction of Silica from Palm Ash Using Citric Acid Leaching Treatment: Preliminary Result
Study on Synthesis of Polypyrrole via Chemical Polymerization Method
Effect of Milling Time on Particle Size and Surface Morphology of Commercial Zeolite by Planetary Ball Mill
Preparation of Colossal Magnetoresistance Ploycrystalline via Sol-Gel Technique: A Short Review
The Atomic Force Microscope Study of Self-Assembled Silicon Nanodots Growth Using Magnetron Sputtering System
Formation of Gold Nanoparticles Film on Silicon Wafer by Self-Assembled Method
Effect of Rice Husk on Fired Ceramic Shell Strength
